Port mobility set not working

[rsr_waahaa]

Hi,

im configuration 802.1X auth on our switches but now i can't set the vlan mobility

Code: Select all

hvge-tk-stack1 -> vlan port mobile 1/13
hvge-tk-stack1 -> show vlan port mobile 1/13
Mobility            : off,
Ingress Filtering   : on

The Port is not qtagged.

The Ports before are working.

[rsr_waahaa]

I found this

Code: Select all

GM warning gm : port 1/13 mobile -> fixed because rx bpdu

so i did this

Code: Select all

vlan port mobile 1/13 bpdu ignore ON

I wonder why i must do this on this Port. This is only a user Port.

[devnull]

apparently It received a bpdu and therfor change the mobility state. if it is a userport i would research why bpdus are received