Can not enter the graphical interface

iaf41
Member
Posts: 19
Joined: 14 Apr 2016 00:59

Can not enter the graphical interface

Post by iaf41 »

I received an os6450-10 switch
I connected the switch to my network
And I connected one computer to the switch
I'm trying to get to the router's graphical interface
But can not

I entered the switch by putty
And there it shows an error message

Code: Select all

+++ ==== HSM === Power Supply 1 is OPERATIONAL
 
MON JAN 01 03:15:15 : WEB (69) info message:
+++ WebView SSL/RSA file-based certificate set-up successful!
 
CMM-NI IPC blocked - EOIC Not Recvd
 
MON JAN 01 03:15:21 : CCM-CHASSIS (100) info message:
+++ === CCM === csCcmEoicFunc: send CCM_CSM_EOIC OK
 
MON JAN 01 03:15:21 : REMOTE_CONFIG (125) info message:
+++ Automatic Remote configuartion Initiated
 
MON JAN 01 03:15:22 : CSM-CHASSIS (103) info message:
+++ == CSM == CMM startup completed
 
MON JAN 01 03:15:23 : CLI (67) info message:
+++ Starting new CLI console session
login :
Successfully sent the I2C read message to NISUP!!
 
MON JAN 01 03:15:33 : INTERFACE (6) info message:
+++ NIs are ready
 
MON JAN 01 03:16:04 : REMOTE_CONFIG (125) error message:
+++ DHCP Response for vlan 1 not received in 30s.
 
MON JAN 01 03:16:04 : REMOTE_CONFIG (125) info message:
+++ Starting the DHCP Client on vlan 127
 
MON JAN 01 03:16:34 : REMOTE_CONFIG (125) error message:
+++ DHCP Response for vlan 127 not received in 30s.
 
MON JAN 01 03:16:34 : REMOTE_CONFIG (125) info message:
+++ Starting the DHCP Client on vlan 1
 
MON JAN 01 03:16:35 : IP-HELPER (22) error message:
+++ relayRecvAck: TFTP Server Name Option is NULL or greater than 64
+++ relayRecvAck: TFTP Boot File Name Option is NULL or greater than 64
 
MON JAN 01 03:16:39 : IP-HELPER (22) error message:
+++ relayRecvAck: TFTP Server Name Option is NULL or greater than 64
+++ relayRecvAck: TFTP Boot File Name Option is NULL or greater than 64
 
MON JAN 01 03:16:47 : IP-HELPER (22) error message:
+++ relayRecvAck: TFTP Server Name Option is NULL or greater than 64
+++ relayRecvAck: TFTP Boot File Name Option is NULL or greater than 64
 
MON JAN 01 03:17:03 : IP-HELPER (22) error message:
+++ relayRecvAck: TFTP Server Name Option is NULL or greater than 64
+++ relayRecvAck: TFTP Boot File Name Option is NULL or greater than 64
 
MON JAN 01 03:17:04 : REMOTE_CONFIG (125) error message:
+++ DHCP Response for vlan 1 not received in 30s.
 
MON JAN 01 03:17:04 : REMOTE_CONFIG (125) info message:
+++ Starting the DHCP Client on vlan 127
 
MON JAN 01 03:17:34 : REMOTE_CONFIG (125) error message:
+++ DHCP Response for vlan 127 not received in 30s.
 
MON JAN 01 03:17:34 : REMOTE_CONFIG (125) info message:
+++ Starting the DHCP Client on vlan 1
 
MON JAN 01 03:17:35 : IP-HELPER (22) error message:
+++ relayRecvAck: TFTP Server Name Option is NULL or greater than 64
+++ relayRecvAck: TFTP Boot File Name Option is NULL or greater than 64

The switch reaches the state where it should get an ip
And it does not get ip
Then he tries again and does not succeed, and so on and so forth


I tried

Code: Select all

rm /flash/working/*.cfg
rm /flash/certified/*.cfg
reload
To reset the switch
It does not work

How can I fix it?
devnull
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 976
Joined: 07 Sep 2010 10:16
Location: Germany

Re: Can not enter the graphical interface

Post by devnull »

Configure it an IP Address?
Supply it with an IP using a DHCP Server (in VLAN 127?)
iaf41
Member
Posts: 19
Joined: 14 Apr 2016 00:59

Re: Can not enter the graphical interface

Post by iaf41 »

how do i do that ?

in the manuel it says that
when the switch back to factory defulet
it take ip atoumatic from dhcp (router dhcp)

here is all the start up boot
i try to find startup-config and delete it
did not find it


Code: Select all

Detect SysClk  320MHz

Detect Tclk    200MHz

Marvell Controller initialization Done.

Eth int Ctrl.... Done

GPIO int Ctrl... Done

PEX int Ctrl.... Done

PEX0 init....... Done. DEVICE type selected

USB Init........ Done

USB int Ctrl.... Done

XOR int Ctrl.... Done

XOR init........ Done

mvCtrlInit2..... done

PCI auto config. done

sysHwInit2...... DoneUSB2 Host Stack Initialized.
USB Hub Driver Initialized 
USBD  Wind River Systems, Inc. 560 Initialized
Non-PCI USB device found: pgmIf=0xa0, idx=0 , baseAddr=0xf1050100, irq=19, swapFunc=0x10abf4
EHCI Controller found.
Waiting to attach to USBD...Done.
0xffffe50 (tRootTask): usbBulkDevInit() returned OK
usbCbiUfiDevInit() returned OK
CBI Class Driver Successfully Initialized

System Configuration

BSP Ver: 1.2/1.1.01   Creation date: May  9 2014, 05:22:44 
CHIP   : MV88F6281 Rev 2
CPU    : ARM926 (Rev 1)
BOARD  : DB-98DX4122-48G (0x7)
CLOCKs : tClk =  200 MHz, sysClk =  320 MHz
         pClk =  800 MHz

NAT_SUPPORT         = Disabled
VFP_SUPPORT         = Disabled
Target Name: vxTarget 
Attaching network interface lo0... done.
Write Protecting exception Vectors

 Write protecting KFos .text sections (0x100000 to 0x527000)  1063 pages 

Adding 11965 symbols for standalone.


Boot parameters are:

 'flash(0,0)cmm:default e=10.4.50.165:ff000000 g=10.4.50.5 u=admin pw=switch cb=9600 cp=none cs=1 cw=8 cm=modemControlOff'


AOS kernel version: 6.6.4.244.R01
VxWorks (for DB-98DX4122-48G BE MMU ARCH 5) version VxWorks5.5.1
KERNEL: WIND version 2.6
Made on May  9 2014, 05:22:44.
Copyright Wind River Systems, Inc., 1984-2006

CPU: DB-98DX4122-48G BE MMU ARCH 5.  Processor #0.
Memory Size: 256 MBytes.  BSP version 1.2/1.1.01.

Portions of code copyrighted by Agranat Systems, Inc.  All Rights reserved
Portions of code copyrighted by Alcatel Internetworking, Inc. 1994-2014.  All Rights reserved
Portions of code copyrighted by Apptitude, Inc. 1997-1999.  All Rights reserved
Portions of code copyrighted by Free Software Foundation, Inc. 1989,1991.  All rights reserved
Portions of code copyrighted by The OpenLDAP Foundation 1999-2000.  All rights reserved
Portions of code copyrighted by Theodore T'so 1994,1995,1996,1997,1998,1999.  All Rights reserved
Portions of code copyrighted by RSA Security, Inc.  All Rights reserved
Portions of code copyrighted by Sun Microsystems, Inc.  All Rights reserved
Portions of code copyrighted by Wind River Systems, Inc.  All Rights reserved
Portions of code developed by the University of California, Berkeley.
Portions of code developed by the Carnegie-Mellon University.



The current date and time is:
Coordinated Universal Time (UTC): SUN DEC 31 01:00:13 2000
Local time: SUN DEC 31 01:00:13 2000 UTC

Starting dynamic software load from '/flash/certified/'...
FIPS_text_start() returns NULL

SUN DEC 31 01:00:23 : SYSTEM (75) info message:
+++ Switch Logging device '/dev/console' enabled for output

SUN DEC 31 01:00:23 : CSM-CHASSIS (103) info message:
+++ == CSM == === Chassis Supervision Starting Up === 
sysStartWatchdog() Starting watchdog timer to INTERRUPT after 240 secs.

SUN DEC 31 01:00:31 : CSM-CHASSIS (103) info message:
+++ == CSM == APP MONITORING ON 
+++ == CSM == ===== THIS STACK(1) IS PRIMARY ===== 

SUN DEC 31 01:00:43 : HSM-CHASSIS (101) info message:
+++ T1:Ni Insertion detected on slot 1
+++ ==== HSM === Power Supply 1 is OPERATIONAL

SUN DEC 31 01:01:01 : WEB (69) info message:
+++ WebView SSL/RSA file-based certificate set-up successful!

CMM-NI IPC blocked - EOIC Not Recvd 

SUN DEC 31 01:01:07 : CCM-CHASSIS (100) info message:
+++ === CCM === csCcmEoicFunc: send CCM_CSM_EOIC OK 

SUN DEC 31 01:01:07 : REMOTE_CONFIG (125) info message:
+++ Automatic Remote configuartion Initiated 

SUN DEC 31 01:01:09 : CSM-CHASSIS (103) info message:
+++ == CSM == CMM startup completed 

SUN DEC 31 01:01:09 : CLI (67) info message:
+++ Starting new CLI console session
login : 
Successfully sent the I2C read message to NISUP!!

SUN DEC 31 01:01:19 : INTERFACE (6) info message:
+++  NIs are ready 

SUN DEC 31 01:01:50 : REMOTE_CONFIG (125) error message:
+++  DHCP Response for vlan 1 not received in 30s.

SUN DEC 31 01:01:50 : REMOTE_CONFIG (125) info message:
+++  Starting the DHCP Client on vlan 127

SUN DEC 31 01:02:20 : REMOTE_CONFIG (125) error message:
+++  DHCP Response for vlan 127 not received in 30s.

SUN DEC 31 01:02:20 : REMOTE_CONFIG (125) info message:
+++  Starting the DHCP Client on vlan 1

SUN DEC 31 01:02:21 : IP-HELPER (22) error message:
+++ relayRecvAck: TFTP Server Name Option is NULL or greater than 64
+++ relayRecvAck: TFTP Boot File Name Option is NULL or greater than 64

SUN DEC 31 01:02:25 : IP-HELPER (22) error message:
+++ relayRecvAck: TFTP Server Name Option is NULL or greater than 64
+++ relayRecvAck: TFTP Boot File Name Option is NULL or greater than 64

SUN DEC 31 01:02:33 : IP-HELPER (22) error message:
+++ relayRecvAck: TFTP Server Name Option is NULL or greater than 64
+++ relayRecvAck: TFTP Boot File Name Option is NULL or greater than 64

SUN DEC 31 01:02:49 : IP-HELPER (22) error message:
+++ relayRecvAck: TFTP Server Name Option is NULL or greater than 64
+++ relayRecvAck: TFTP Boot File Name Option is NULL or greater than 64

SUN DEC 31 01:02:50 : REMOTE_CONFIG (125) error message:
+++  DHCP Response for vlan 1 not received in 30s.

SUN DEC 31 01:02:50 : REMOTE_CONFIG (125) info message:
+++  Starting the DHCP Client on vlan 127

login : admin
password : 
  
Welcome to the Alcatel-Lucent OmniSwitch 6450
Software Version 6.6.4.244.R01 Service Release, May 09, 2014. 

Copyright(c), 1994-2013 Alcatel-Lucent. All Rights reserved.

OmniSwitch(TM) is a trademark of Alcatel-Lucent registered
in the United States Patent and Trademark Office.
  
-> 
SUN DEC 31 01:02:56 : REMOTE_CONFIG (125) info message:
+++  User logged in via console, Automatic Remote configuration is aborted.
ls

Listing Directory /flash:

-rw       312 Dec 31 01:00 boot.params 
drw      2048 Jan  1  2001 certified/
drw      2048 Jan  1  2001 working/
-rw        32 Dec 31 01:00 boot.slot.cfg 
-rw     64000 Dec 31 01:03 swlog1.log 
-rw     64000 Dec 31 01:28 swlog2.log 
drw      2048 Dec 31 01:11 switch/
drw      2048 Dec 31 01:01 network/
-rw       207 Jan  1  2001 boot.cfg.1.err 
-rw        20 Dec 31 01:11 installed 

\0x0957948160 bytes free

-> ls /working/

Listing Directory /working/:

drw      2048 Jan  1  2001 ./
drw      2048 Dec 31 01:00 ../
-rw       705 Jun 10  2013 software.lsm 
-rw  16231207 May 19  2014 KFbase.img 
-rw   2327149 Jan  3  2001 KFdiag.img 
-rw   5261945 May 19  2014 KFeni.img 
-rw   2585572 May 19  2014 KFos.img 
-rw    603721 May 19  2014 KFsecu.img 

\0x0957948160 bytes free

-> ls /certified/

Listing Directory /certified/:

drw      2048 Jan  1  2001 ./
drw      2048 Dec 31 01:00 ../
-rw       705 Jun 10  2013 software.lsm 
-rw  16231207 May 19  2014 KFbase.img 
-rw   2327149 Jan  3  2001 KFdiag.img 
-rw   5261945 May 19  2014 KFeni.img 
-rw   2585572 May 19  2014 KFos.img 
-rw    603721 May 19  2014 KFsecu.img 

\0x0957948160 bytes free

-> ls

Listing Directory /flash:

-rw       312 Dec 31 01:00 boot.params 
drw      2048 Jan  1  2001 certified/
drw      2048 Jan  1  2001 working/
-rw        32 Dec 31 01:00 boot.slot.cfg 
-rw     64000 Dec 31 01:03 swlog1.log 
-rw     64000 Dec 31 01:28 swlog2.log 
drw      2048 Dec 31 01:11 switch/
drw      2048 Dec 31 01:01 network/
-rw       207 Jan  1  2001 boot.cfg.1.err 
-rw        20 Dec 31 01:11 installed 

\0x0957948160 bytes free

-> ls /switch/

Listing Directory /switch/:

drw      2048 Dec 31 01:11 ./
drw      2048 Dec 31 01:00 ../
-rw    105613 Jan  1  2001 certs.pem 
-rw        20 Dec 31 01:00 snmp.engine 
-rw         0 Jan  1  2001 pre_banner.txt 
drw      2048 Dec 31 01:11 avlan/
-rw      1732 Dec 31 01:11 label.txt 
-rw       973 Nov 15  2014 wv-cert.pem 
-rw       963 Nov 15  2014 wv-key.pem 
-rw        23 Dec 31 01:02 dhcpClient.db 
-rw      1732 Nov 15  2014 label.txt.bk 

\0x0957948160 bytes free

-> ls /network/

Listing Directory /network/:

drw      2048 Dec 31 01:01 ./
drw      2048 Dec 31 01:00 ../
-rw     91392 Jan  1  2001 userTable5 
-rw        12 Dec 31 01:00 lockoutSetting 
-rw        33 Dec 31 01:01 policy.cfg 
-rw       404 Dec 31 01:01 ssh_host_dsa_key 
-rw       358 Dec 31 01:01 ssh_host_dsa_key.pub 

\0x0957948160 bytes free

-> login : ls
password : 

SUN DEC 31 01:22:47 : SESSION (71) info message:
+++ [SES] Authentication failed: Session 0, access type Console
+++ [SES] Session 0, user "ls"
+++ [SES] Session 0, IP address 0.0.0.0
Authentication failure : Server temporarily unreachable, please try later
login : switch
password : 

SUN DEC 31 01:22:54 : SESSION (71) info message:
+++ [SES] Authentication failed: Session 0, access type Console
+++ [SES] Session 0, user "switch"
+++ [SES] Session 0, IP address 0.0.0.0
Authentication failure : Server temporarily unreachable, please try later
login : admin
password : 
  
Welcome to the Alcatel-Lucent OmniSwitch 6450
Software Version 6.6.4.244.R01 Service Release, May 09, 2014. 

Copyright(c), 1994-2013 Alcatel-Lucent. All Rights reserved.

OmniSwitch(TM) is a trademark of Alcatel-Lucent registered
in the United States Patent and Trademark Office.
  
-> ls

Listing Directory /flash:

-rw       312 Dec 31 01:00 boot.params 
drw      2048 Jan  1  2001 certified/
drw      2048 Jan  1  2001 working/
-rw        32 Dec 31 01:00 boot.slot.cfg 
-rw     64000 Dec 31 01:22 swlog1.log 
-rw     64000 Dec 31 01:28 swlog2.log 
drw      2048 Dec 31 01:11 switch/
drw      2048 Dec 31 01:01 network/
-rw       207 Jan  1  2001 boot.cfg.1.err 
-rw        20 Dec 31 01:11 installed 

\0x0957948160 bytes free

-> ls /certified/

Listing Directory /certified/:

drw      2048 Jan  1  2001 ./
drw      2048 Dec 31 01:00 ../
-rw       705 Jun 10  2013 software.lsm 
-rw  16231207 May 19  2014 KFbase.img 
-rw   2327149 Jan  3  2001 KFdiag.img 
-rw   5261945 May 19  2014 KFeni.img 
-rw   2585572 May 19  2014 KFos.img 
-rw    603721 May 19  2014 KFsecu.img 

\0x0957948160 bytes free

-> ls /working/

Listing Directory /working/:

drw      2048 Jan  1  2001 ./
drw      2048 Dec 31 01:00 ../
-rw       705 Jun 10  2013 software.lsm 
-rw  16231207 May 19  2014 KFbase.img 
-rw   2327149 Jan  3  2001 KFdiag.img 
-rw   5261945 May 19  2014 KFeni.img 
-rw   2585572 May 19  2014 KFos.img 
-rw    603721 May 19  2014 KFsecu.img 

\0x0957948160 bytes free

-> ls

Listing Directory /flash:

-rw       312 Dec 31 01:00 boot.params 
drw      2048 Jan  1  2001 certified/
drw      2048 Jan  1  2001 working/
-rw        32 Dec 31 01:00 boot.slot.cfg 
-rw     64000 Dec 31 01:22 swlog1.log 
-rw     64000 Dec 31 01:28 swlog2.log 
drw      2048 Dec 31 01:11 switch/
drw      2048 Dec 31 01:01 network/
-rw       207 Jan  1  2001 boot.cfg.1.err 
-rw        20 Dec 31 01:11 installed 

\0x0957948160 bytes free

-> dir

Listing Directory /flash:

-rw       312 Dec 31 01:00 boot.params 
drw      2048 Jan  1  2001 certified/
drw      2048 Jan  1  2001 working/
-rw        32 Dec 31 01:00 boot.slot.cfg 
-rw     64000 Dec 31 01:22 swlog1.log 
-rw     64000 Dec 31 01:28 swlog2.log 
drw      2048 Dec 31 01:11 switch/
drw      2048 Dec 31 01:01 network/
-rw       207 Jan  1  2001 boot.cfg.1.err 
-rw        20 Dec 31 01:11 installed 

\0x0957948160 bytes free

-> cd..
   ^
ERROR: Invalid entry: "cd.."
-> cd/
   ^
ERROR: Invalid entry: "cd/"
-> dir

Listing Directory /flash:

-rw       312 Dec 31 01:00 boot.params 
drw      2048 Jan  1  2001 certified/
drw      2048 Jan  1  2001 working/
-rw        32 Dec 31 01:00 boot.slot.cfg 
-rw     64000 Dec 31 01:22 swlog1.log 
-rw     64000 Dec 31 01:28 swlog2.log 
drw      2048 Dec 31 01:11 switch/
drw      2048 Dec 31 01:01 network/
-rw       207 Jan  1  2001 boot.cfg.1.err 
-rw        20 Dec 31 01:11 installed 

\0x0957948160 bytes free

-> dir startup-config

Listing Directory /flash:


\0x0957948160 bytes free

-> ls /flash/

Listing Directory /flash/:

-rw       312 Dec 31 01:00 boot.params 
drw      2048 Jan  1  2001 certified/
drw      2048 Jan  1  2001 working/
-rw        32 Dec 31 01:00 boot.slot.cfg 
-rw     64000 Dec 31 01:22 swlog1.log 
-rw     64000 Dec 31 01:28 swlog2.log 
drw      2048 Dec 31 01:11 switch/
drw      2048 Dec 31 01:01 network/
-rw       207 Jan  1  2001 boot.cfg.1.err 
-rw        20 Dec 31 01:11 installed 

\0x0957948160 bytes free

-> cd flash
ERROR: flash: no such directory


-> cd/flash
   ^
ERROR: Invalid entry: "cd/flash"
-> ls

Listing Directory /flash:

-rw       312 Dec 31 01:00 boot.params 
drw      2048 Jan  1  2001 certified/
drw      2048 Jan  1  2001 working/
-rw        32 Dec 31 01:00 boot.slot.cfg 
-rw     64000 Dec 31 01:22 swlog1.log 
-rw     64000 Dec 31 01:28 swlog2.log 
drw      2048 Dec 31 01:11 switch/
drw      2048 Dec 31 01:01 network/
-rw       207 Jan  1  2001 boot.cfg.1.err 
-rw        20 Dec 31 01:11 installed 

\0x0957948160 bytes free

-> ls /flash/

Listing Directory /flash/:

-rw       312 Dec 31 01:00 boot.params 
drw      2048 Jan  1  2001 certified/
drw      2048 Jan  1  2001 working/
-rw        32 Dec 31 01:00 boot.slot.cfg 
-rw     64000 Dec 31 01:22 swlog1.log 
-rw     64000 Dec 31 01:28 swlog2.log 
drw      2048 Dec 31 01:11 switch/
drw      2048 Dec 31 01:01 network/
-rw       207 Jan  1  2001 boot.cfg.1.err 
-rw        20 Dec 31 01:11 installed 

\0x0957948160 bytes free

-> ls /flash/certified/

Listing Directory /flash/certified/:

drw      2048 Jan  1  2001 ./
drw      2048 Dec 31 01:00 ../
-rw       705 Jun 10  2013 software.lsm 
-rw  16231207 May 19  2014 KFbase.img 
-rw   2327149 Jan  3  2001 KFdiag.img 
-rw   5261945 May 19  2014 KFeni.img 
-rw   2585572 May 19  2014 KFos.img 
-rw    603721 May 19  2014 KFsecu.img 

\0x0957948160 bytes free

-> ls /flash/working/

Listing Directory /flash/working/:

drw      2048 Jan  1  2001 ./
drw      2048 Dec 31 01:00 ../
-rw       705 Jun 10  2013 software.lsm 
-rw  16231207 May 19  2014 KFbase.img 
-rw   2327149 Jan  3  2001 KFdiag.img 
-rw   5261945 May 19  2014 KFeni.img 
-rw   2585572 May 19  2014 KFos.img 
-rw    603721 May 19  2014 KFsecu.img 

\0x0957948160 bytes free

-> login : 
devnull
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 976
Joined: 07 Sep 2010 10:16
Location: Germany

Re: Can not enter the graphical interface

Post by devnull »

apparantley no DHCP is answering in VLAN 1 or 127.

You have console access, why not assign a ip?
->
ip interface "vl1" vlan 1 address 192.168.0.11 mask 255.255.255.0

Same basic commands are listed ón the following website:
http://www.latouche.info/admin/user_gui ... witch.html
iaf41
Member
Posts: 19
Joined: 14 Apr 2016 00:59

Re: Can not enter the graphical interface

Post by iaf41 »

why not assign a ip?
In my understanding it was supposed to happen automatically
And if that does not happen
I must have done something wrong

ip interface "vl1" vlan 1 address 192.168.0.110 mask 255.255.255.0
If I type this line in console (Is this the correct syntax)
The graphical interface will be 192.168.0.110?


My ultimate goal
Is to get to the graphical interface and from there update the firmware of the switch
I downloaded a file named "OS6450_AOS_6.7.2_R02_MIBs.zip"
iaf41
Member
Posts: 19
Joined: 14 Apr 2016 00:59

Re: Can not enter the graphical interface

Post by iaf41 »

after this syntax
do I need to save after this command
Or just reload the switch ?
iaf41
Member
Posts: 19
Joined: 14 Apr 2016 00:59

Re: Can not enter the graphical interface

Post by iaf41 »

it worked
now i am trying to update the Firmware
I searched the graphical interface
The option to load new firmware and not found

Is it possible to do this from the console


this is what i have now

Code: Select all

Description 	Alcatel-Lucent OS6450-10 6.6.4.244.R01 Service Release, May 09, 2014.
i download this file "OS6450_AOS_6.7.2_R02_MIBs.zip"
Is this the correct file ?
You do not have the required permissions to view the files attached to this post.
devnull
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 976
Joined: 07 Sep 2010 10:16
Location: Germany

Re: Can not enter the graphical interface

Post by devnull »

I only updated firmware through CLI using tftp or USB.

The file that you stated is the MIB files for SNMP and not software.
The Upgrade process should be mentioned in the release note and/or the manuals
iaf41
Member
Posts: 19
Joined: 14 Apr 2016 00:59

Re: Can not enter the graphical interface

Post by iaf41 »

I only updated firmware through CLI using tftp or USB.
So do I

I thought that this firmware could be upgraded in the same way
or from gui
I am trying to find the option of poe
And I can not find it
That's why I want to upgrade
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Can not enter the graphical interface

Post by cavagnaro »

PoE is a hardware feature, not only software. Your switch has that feature on its hardware?


Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Post Reply

Return to “OmniSwitch 6450”