hi all,
sorry for that probably simple question. But somehow i stuck on this.
I have a Switch 6450 for replacement another same model. We use Omnivista - so i can copy all config from the backup.
I copied all files from usb to the switch. but then? I made a wr mem and then i saw the old boot.cfg again in the Folder..
think its pretty simple ..can someone help?
thanks a lot
Copy Config via Usb?
Re: Copy Config via Usb?
after copy the boot.cfg to working you have to reload from working (reload working no rollback-timeout) without saving anything.
regards
Silvio
regards
Silvio
-
- Member
- Posts: 17
- Joined: 02 Jun 2017 03:20
Re: Copy Config via Usb?
Hi Silvio,
thanks a lot... but just for understanding - is there everything stored in the boot.cfg? Such as vlan Settings, snmp,name etc?
Thanks for short answer
Best Regards
Cyb
thanks a lot... but just for understanding - is there everything stored in the boot.cfg? Such as vlan Settings, snmp,name etc?
Thanks for short answer
Best Regards
Cyb
Re: Copy Config via Usb?
all config is stored in the boot.cfg (you can look into the file - it is a text-file). Only users (with password and the rights) are in the usertable.
regards
Silvio
regards
Silvio
Re: Copy Config via Usb?
To add to Silvio: banners are also in seperate files.
-
- Member
- Posts: 17
- Joined: 02 Jun 2017 03:20
Re: Copy Config via Usb?
Thanks you both,
it worked fine. As i should copy the Banners and the users also. Saw that too late
greets
Cyb
it worked fine. As i should copy the Banners and the users also. Saw that too late
greets
Cyb