Hi all ,
found an issue while changing Access Points.
On the affected Switch (5 Stack) 6450 i can´t see the mac-adresses from the new Access Points.
I can found it on the router and the Uplink one Switch before and after via UPLINK. So they are definetely there. Also the new Access Points work fine .
But again : i couldnt get the mac-adresses in this stack. Other devices like PCs , Printer etc i get the mac-adresses
Someone had this also or know what the issue could be??
Thanks a lot
Cyb
Mac Adress missing
Re: Mac Adress missing
never seen this behavior. Did you see the mac addresses of the wireless clients at the port where the ap is attached?
regards
Silvio
regards
Silvio
-
- Member
- Posts: 17
- Joined: 02 Jun 2017 03:20
Re: Mac Adress missing
Hi Silvio,
thanks. Think there is a General issue. As i know have to configure something and put it on the switch ..also no ip except the device get an address from dhcp. So i think we should reboot the stack and look if its cleared.
Or have you another suggest before reboot?
bR
thanks. Think there is a General issue. As i know have to configure something and put it on the switch ..also no ip except the device get an address from dhcp. So i think we should reboot the stack and look if its cleared.
Or have you another suggest before reboot?
bR
Re: Mac Adress missing
this is a good idea. Hope it will help.
regards
Silvio
regards
Silvio
-
- Member
- Posts: 17
- Joined: 02 Jun 2017 03:20
Re: Mac Adress missing
Hi Silvio,
according to the issue the info from me :
reboot cleared it.
Thanks
according to the issue the info from me :
reboot cleared it.
Thanks