Deployment 8088 deskphone

Post Reply
adriano_santos
Member
Posts: 11
Joined: 04 Oct 2017 09:48

Deployment 8088 deskphone

Post by adriano_santos » 14 Nov 2017 13:13

Dear,

I am a beginner in the OT, and I have a problem, I have already installed the application, but when trying to deployment 8088, the same resets after step 3, after reset on the display the following message is displayed.

Could not retrieve the following files:
https://ipserver/dmictouch/config.mac.xml and $ {ENETCFG_SIP_FILE}

I sincerely looked in the documentation and found no solution.

I would like a response from the gentlemen who have more experience, thank you very much already.

att,


Adriano Santos

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6949
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Deployment 8088 deskphone

Post by cavagnaro » 14 Nov 2017 15:03

Search forum. You have to declare your phone so it creates a xml file for your device.

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

adriano_santos
Member
Posts: 11
Joined: 04 Oct 2017 09:48

Re: Deployment 8088 deskphone

Post by adriano_santos » 16 Nov 2017 08:40

Okay, but when trying to sign the certificate with the 8088, but the device's display shows the information that the set was not declared as a signing device, it is not accepted? Can I just use 8082?

doublezero
Member
Posts: 37
Joined: 12 Apr 2012 09:39

Re: Deployment 8088 deskphone

Post by doublezero » 17 Nov 2017 09:52

You must declare in webadmin the mac of the signing device

Gesendet von meinem A0001 mit Tapatalk

ACFE OXE R11.1 | ACSE OpenTouch R2.0 | ACSE 8770 R2.5

adriano_santos
Member
Posts: 11
Joined: 04 Oct 2017 09:48

Re: Deployment

Post by adriano_santos » 20 Nov 2017 22:03

I am having trouble signing the certificate in version 2.3, when trying to sign with 8082 appears the message that the device is not enabled to sign the certificate, someone knows how to resolve this failure.

ltatge
Member
Posts: 83
Joined: 19 Sep 2012 15:49

Re: Deployment 8088 deskphone

Post by ltatge » 21 Nov 2017 03:28

Doublezero gave the answer...

Check systemdocs step by step and it will work.

Regards

Post Reply

Return to “OTMS - OpenTouch Multimedia Services”