Help OTMS + OXE
-
- Member
- Posts: 19
- Joined: 21 Nov 2017 14:40
Help OTMS + OXE
Hello, I'm installing an opentouch, this is the first one, I'm a little lost, I can not synchronize the OT with OXE at all.
my doubt, I have to have OT and OXE in the same ominivista?
if not how to solve this problem
** error: OXE with IP address 192.168.10.1 is not available in system directory
was created site with all the information of OXE.
Thank you very much, case of emergency.
my doubt, I have to have OT and OXE in the same ominivista?
if not how to solve this problem
** error: OXE with IP address 192.168.10.1 is not available in system directory
was created site with all the information of OXE.
Thank you very much, case of emergency.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Help OTMS + OXE
Emergency? An installation? Then hire PS or contact ALE support...this is step one only.
Later you will find much more stuff to do.
Enviado de meu E6633 usando o Tapatalk
Later you will find much more stuff to do.
Enviado de meu E6633 usando o Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 19
- Joined: 21 Nov 2017 14:40
Re: Help OTMS + OXE
Support problem ale is the delay, kkkk
if you could give me this information it would help me a lot.
Thank you.
if you could give me this information it would help me a lot.
Thank you.
Re: Help OTMS + OXE
Pay me a support fee and i will be happy to get in and show you how to resolve the issue., Message me if you want to proceed
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."
-
- Member
- Posts: 19
- Joined: 21 Nov 2017 14:40
Re: Help OTMS + OXE
I found it and this was a help forum on Alcatel. I just asked a question for a problem, I'm not trying to hire anyone.
Re: Help OTMS + OXE
yes it is. But we businesspartner pay a lot of money and time to know how to implement those systems and to have all certification to sell them. And if you do all those necessary courses at Alcatel, then you know how to do it.
i hope you understand why we don´t help, if there is no intention so pay for it, especially if it a basic question as yours...
i hope you understand why we don´t help, if there is no intention so pay for it, especially if it a basic question as yours...
-
- Member
- Posts: 19
- Joined: 21 Nov 2017 14:40
Re: Help OTMS + OXE
I know this, I also have several certifications, but I'm starting now with OPENTOUCH, so what are you telling me that this forum has become a place to find service providers?
if you can not answer me a basic doubt like this imagine an advanced. however as I said I am not behind to hire servic
if you can not answer me a basic doubt like this imagine an advanced. however as I said I am not behind to hire servic
Re: Help OTMS + OXE
you start with OT without any course fom Alcatel? good luck
i tried it myself without knowledge and failed pretty hard
i tried it myself without knowledge and failed pretty hard
-
- Member
- Posts: 19
- Joined: 21 Nov 2017 14:40
Re: Help OTMS + OXE
Actually I had a face-to-face course of 1 week, but the product is so good that even the instructor could not make an 8082 deskphone work.
haha
haha
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Help OTMS + OXE
Lol, maybe was a trainer from Central America or Mexico? XD I know a couple with those skills.
Ideas was not to force you pay, no way, but to guide you to the best solution. Like if you are building something complex then you may need much more help at implementation and business decision making too, as first hand installation experience is a good friend.
Enviado de meu E6633 usando o Tapatalk
Ideas was not to force you pay, no way, but to guide you to the best solution. Like if you are building something complex then you may need much more help at implementation and business decision making too, as first hand installation experience is a good friend.
Enviado de meu E6633 usando o Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer