Omniswitch 6860 Initial setup / 802.1x configuration

Post Reply
veera
Member
Posts: 2
Joined: 18 Mar 2021 12:18

Omniswitch 6860 Initial setup / 802.1x configuration

Post by veera »

Hi friends,

We have bought a Omniswitcj 6860 switch recently .i need to do initial configuration like (ip address / gateway / trunk etc) .
Basically wanted to use this switch for 802.1x (AAA authentication) .i couldn't find the configuration steps.
I would appreciate ,if you can share the steps to bring up the switch in network and AAA configurations.

Thanks in advance
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1551
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Omniswitch 6860 Initial setup / 802.1x configuration

Post by silvio »

Ask your supplier for the guides (you need access to the business portal from Alcatel).
here one of the importants for the initial setup:
https://www.al-enterprise.com/en/-/medi ... -rev-b.pdf
best regards
Silvio
veera
Member
Posts: 2
Joined: 18 Mar 2021 12:18

Re: Omniswitch 6860 Initial setup / 802.1x configuration

Post by veera »

Thanks Silvio.Will check this document
Post Reply

Return to “OmniSwitch 6860 / 6860E”