We support GIXEN, the eBay sniper.

Firmware upgrade

Post Reply
alcomint
Member
Posts: 17
Joined: 19 Apr 2016 10:10

Firmware upgrade

Post by alcomint » 06 Sep 2016 05:47

Hi all,

What is the procedure to upgrade the firmware at 6860/6860E, how many files do I required?

I have only Uom.img but in software.lsm it tell about other files as well such as

Primary-site: file:Udiag.img, 41312164
Primary-site: file:Uos.img, 212309712
Primary-site: file:u-boot.8.1.1.R01.664.tar.gz, 588730

Can you please guide me through ?

Best Regards,

MicahNguyen
Member
Posts: 22
Joined: 14 Jun 2015 22:52

Re: Firmware upgrade

Post by MicahNguyen » 06 Sep 2016 06:24

Only one file and put it inside /flash/working
Then reload 6860E from working.
Do synchronization between /flash/working and /flash/certified after reloaded

Done

MicahNguyen
Member
Posts: 22
Joined: 14 Jun 2015 22:52

Re: Firmware upgrade

Post by MicahNguyen » 06 Sep 2016 06:24

Only one file and put it inside /flash/working
Then reload 6860E from working.
Do synchronization between /flash/working and /flash/certified after reloaded

Done

alcomint
Member
Posts: 17
Joined: 19 Apr 2016 10:10

Re: Firmware upgrade

Post by alcomint » 06 Sep 2016 06:47

How to do reload from working?

can you please list the commands, first time I am touching 6860 box.

I have this error as well

OS6860e-U28-> copy flash-synchro
ERROR: Attempt to copy working to cert w/flash synchr failed

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 888
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Firmware upgrade

Post by silvio » 07 Sep 2016 01:41

Hi,
copy flash-synchro is for synchr within a VC/Stack to the other chassis.
you need: copy running certified

Best way is to use: write memory flash-synchro

In switch management guide all is written.
regards
Silvio

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 888
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Firmware upgrade

Post by silvio » 07 Sep 2016 01:42

> reload from working no rollback-timeout ist the command

Post Reply

Return to “OmniSwitch 6860 / 6860E”

Who is online

Users browsing this forum: No registered users and 2 guests