VLAN Restore

[ericcyow]

Hi all,

Greetings...

Does anyone know what is the equivalent command for "vlan port 1/1/32 default vlan restore disable" in AOS 8.3.1?

Thank you and much appreciated.

[silvio]

Hi,
in R8 you need AccessGuardian 2.0 with classification instead vlan-rules. So this different to R6.
In R8 you have to configure the vlan(s) for silent devices or WOL directly.

If you use templates for your edge or bridge ports (my prefered solution) than the following:
> unp port-template YOUR-TEMPLATE vlan XX

But you can also do it direct to your ports:
> unp port 1/1/1 vlan XX-YY

regards
Silvio

[ericcyow]

Ok, noted with thanks