Hello guys,
I have an alcatel switch 6850 which I find some odd config.
Normally for cisco switch, if we can only configure the interface as access OR trunk.
But apparently in Alcatel, I found this both configuration exist in the switch.
vlan 10 port default 1/1 >>>>>>>>> this command makes the switch access port and assigned the vlan, if im not mastaking.
But I also see the same port being used to 802.1Q.
! 802.1Q :
vlan 4 802.1q 1/1 "TAG PORT 1/19 VLAN 4"
vlan 5 802.1q 1/1 "TAG PORT 1/19 VLAN 5"
vlan 6 802.1q 1/1 "TAG PORT 1/19 VLAN 6"
What is the impact of this? What will be the role of this port if these are the config.
Thanks in advance.
Regards