Multicast VLAN Routing OM6860

[dinhminh]

Multicast Source is on vlan 2 and Receiever is on vlan 3
What do i need to configure so that members of vlan 3 can receive a muticast stream coming from a source on vlan2

I will appreciate any pointers provided
My configuration is below:

! Configuration:
configuration error-file-limit 2

! Capability Manager:
hash-control extended

! Virtual Flow Control:
! LFP:
! Interface:
! Port_Manager:
! Link Aggregate:
! VLAN:
vlan 1-3 admin-state enable
vlan 2 name "IPTV"
vlan 3 name "MANG_VP"
spb bvlan 4000 admin-state enable
spb bvlan 4000 name "AutoFabric 1/1/2014 04:00:28"
spb bvlan 4001-4015 admin-state enable
spb bvlan 4001-4015 name "AutoFabric 1/1/2014 04:00:28"
vlan 2 members port 1/1/1-6 untagged
vlan 3 members port 1/1/7-12 untagged
vlan 2 members port 1/1/21-24 tagged
vlan 3 members port 1/1/21-24 tagged

! PVLAN:
! Spanning Tree:
spantree mode flat
spantree vlan 1 admin-state enable
spantree vlan 2 admin-state enable
spantree vlan 3 admin-state enable
spantree vlan 10 admin-state disable
spantree vlan 4000 admin-state disable
spantree vlan 4001 admin-state disable
spantree vlan 4002 admin-state disable
spantree vlan 4003 admin-state disable
spantree vlan 4004 admin-state disable
spantree vlan 4005 admin-state disable
spantree vlan 4006 admin-state disable
spantree vlan 4007 admin-state disable
spantree vlan 4008 admin-state disable
spantree vlan 4009 admin-state disable
spantree vlan 4010 admin-state disable
spantree vlan 4011 admin-state disable
spantree vlan 4012 admin-state disable
spantree vlan 4013 admin-state disable
spantree vlan 4014 admin-state disable
spantree vlan 4015 admin-state disable

! DA-UNP:
! Bridging:
! Port Mirroring:
! Port Mapping:
! IP:
ip interface "vlan_2_ip" address 192.168.20.1 mask 255.255.255.0 vlan 2 ifindex 1
ip interface "vlan_3_ip" address 192.168.30.1 mask 255.255.255.0 vlan 3 ifindex 2
ip interface "test1" address 172.168.10.100 mask 255.255.255.0 vlan 10 rtr-port port 1/1/20 untagged ifindex 3

! IPv6:
! IPSec:
! IPMS:
ip multicast admin-state enable
ip multicast querying enable
ip multicast vlan 2 admin-state enable
ip multicast vlan 2 querying enable
ip multicast vlan 2 spoofing enable
ip multicast vlan 2 zapping enable
ip multicast vlan 2 proxying enable
ip multicast vlan 2 querier-forwarding enable
ip multicast vlan 3 admin-state enable
ip multicast vlan 3 querying enable
ip multicast vlan 3 spoofing enable
ip multicast vlan 3 zapping enable
ip multicast vlan 3 proxying enable
ip multicast vlan 3 querier-forwarding enable

! AAA:
aaa authentication default "local"
aaa authentication console "local"

aaa tacacs command-authorization disable

! NTP:
! QOS:
! Policy Manager:
! VLAN Stacking:
! ERP:
! MVRP:
mvrp enable

! LLDP:
! UDLD:
! Server Load Balance:
! High Availability Vlan:
! Session Manager:
! Web:
! Trap Manager:
! Health Monitor:
! System Service:
usb enable

! SNMP:
! BFD:
! IP Route Manager:
! VRRP:
ip load vrrp

! UDP Relay:
! RIP:
! OSPF:
! IP Multicast:
ip load pim
ip pim interface "vlan_2_ip"
ip pim interface "vlan_3_ip"
ip pim cbsr 192.168.20.1
ip pim candidate-rp 192.168.20.1 224.0.0.0/4
ip pim sparse admin-state enable
ip pim dense admin-state enable
ipv6 pim sparse admin-state disable
ipv6 pim dense admin-state disable

! DVMRP:
! IPMR:
! RIPng:
! OSPF3:
! BGP:
! ISIS:
! Netsec:
! Module:
! LAN Power:
! RDP:
! DHL:
! Ethernet-OAM:
! SAA:
! SPB-ISIS:
spb isis bvlan 4000 ect-id 1
spb isis bvlan 4001 ect-id 2
spb isis bvlan 4002 ect-id 3
spb isis bvlan 4003 ect-id 4
spb isis bvlan 4004 ect-id 5
spb isis bvlan 4005 ect-id 6
spb isis bvlan 4006 ect-id 7
spb isis bvlan 4007 ect-id 8
spb isis bvlan 4008 ect-id 9
spb isis bvlan 4009 ect-id 10
spb isis bvlan 4010 ect-id 11
spb isis bvlan 4011 ect-id 12
spb isis bvlan 4012 ect-id 13
spb isis bvlan 4013 ect-id 14
spb isis bvlan 4014 ect-id 15
spb isis bvlan 4015 ect-id 16
spb isis control-bvlan 4000
spb isis admin-state enable

! SVCMGR:
service l2profile "unp-def-access-profile" stp drop

! LDP:
! EVB:
! APP-FINGERPRINT:
! FCOE:
! QMR:
! OPENFLOW:
! Dynamic auto-fabric:
auto-fabric admin-state enable

! SIP Snooping:
! DHCP Server:
dhcp-server enable

! DHCPv6 Relay:
! DHCPv6 Server:
! DHCP Message Service:
! DHCP Active Lease Service:
! Virtual Chassis Split Protection:
! DHCP Snooping:
! APP-MONITORING:
! Loopback Detection:
! VM-SNOOPING:
! PPPOE-IA:
! Security:
! Zero Configuration:
! MAC Security:
! OVC:
! EFM-OAM:
! ALARM-MANAGER:

[silvio]

You need MC-Routing in this case - protocolls like PIM-SM, PIM-DM or DVMRP.
In this easy case with only one router I prefer DVMRP. You will find other posts (or guides from Alcatel) how to activate this.
best regards
Silvio

[dinhminh]

so i had added some command , but it not still work:

ip multicast admin-state enable
ip load dvmrp
ip dvmrp interface vlan_2_ip
ip dvmrp interface vlan_3_ip

[silvio]

ip dvmrp status enable