Lanpower problems on 6350

User avatar
thermseeker
Member
Posts: 23
Joined: 08 Jul 2016 08:40

Lanpower problems on 6350

Post by thermseeker » 26 Nov 2018 09:27

Hi all,

Please see if you can help me with this...

6350-P24 and -P48 units stop feeding power to a group of 8 ports after a power cycle. I saw this happen twice, on a -P24 about an year ago, and on a -P48 yesterday. On the -P24 I tried reboot, power cycle, firmware update but nothing helped. Also no errors during the startup on in the logs. I concluded I had a hardware fault, and after a few weeks when I was preparing to replace and send it to tech support I retested the bad ports and they were back to normal. On the -P48 I did a power cycle a few minutes ago and no go. I'm gonna wait a few weeks and retest.

Both times the ports were feeding A-L APs IAP-103 and/or Aastra 7433ip IP phones. Both loads are much below the max for each port. The power sources are 525 W on the -P24 and 915 W on the -P48 no lack of power is not an issue.

I have several 6450-Pxx here but never had an issue with those.

This is very weird, has anyone seen this? Thank you in advance for any reply.

Tales Maschio
thermseeker

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1320
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Lanpower problems on 6350

Post by silvio » 26 Nov 2018 15:15

This was a known issue. You have to update the switches to an actual release (maybe also the uboot).
best regards
Silvio

User avatar
thermseeker
Member
Posts: 23
Joined: 08 Jul 2016 08:40

Re: Lanpower problems on 6350

Post by thermseeker » 26 Nov 2018 19:03

I think I’m on the latest version. Not sure about the uboot tho. Will check. Many thanks.
tales

User avatar
thermseeker
Member
Posts: 23
Joined: 08 Jul 2016 08:40

Re: Lanpower problems on 6350

Post by thermseeker » 04 Jan 2019 07:19

Hello! Wish you all a happy 2019!

Updated all switches (~30) in this site to latest available AOS/uboot-miniboot/FPGA. On the 6350s "show ni" shows that the POE SW version was updated. So maybe this issue is gone.

Thank you Silvio.

Tales

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1320
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Lanpower problems on 6350

Post by silvio » 05 Jan 2019 13:10

Thanks for the successfull reply.
regards
Silvio

Mohammadlinux
Member
Posts: 11
Joined: 26 Jul 2018 05:38

Re: Lanpower problems on 6350

Post by Mohammadlinux » 27 Feb 2019 01:07

I was update the OS to OS6350_6.7.2.113.R05 also OS6350_6.7.2_R02_Uboot_Miniboot and OS6350_6.7.1.146_FPGA but not solved.
Is there POE SW version update?
any idea?

User avatar
thermseeker
Member
Posts: 23
Joined: 08 Jul 2016 08:40

Re: Lanpower problems on 6350

Post by thermseeker » 27 Feb 2019 06:19

Hello Mohammad,

The POE SW version comes updated with uboot-miniboot or FPGA (not sure which), there is no separate file for it. On my firmware files the versions for uboot-miniboot and FPGA are both OS6350_6.7.2_R05, which look newer than yours.

Check your versions with "show microcode" and "show ni". Here the output for one of my 6350 units:

Code: Select all

> show microcode
   Package           Release       Size     Description
-----------------+---------------+--------+-----------------------------------
KF3base.img       6.7.2.113.R05   16582339 Alcatel-Lucent Enterprise Base Softw
KF3os.img         6.7.2.113.R05    3698036 Alcatel-Lucent Enterprise OS
KF3eni.img        6.7.2.113.R05    6634341 Alcatel-Lucent Enterprise NI softwar
KF3secu.img       6.7.2.113.R05     621210 Alcatel-Lucent Enterprise Security M

Code: Select all

> show ni
Module in slot 1
  Model Name:                    OS6350-P24,
  Description:                   6350 24 PORT COPPER GE POE ,
  Part Number:                   903794-90,
  Hardware Revision:             15,
  Serial Number:                 xxxxxxxx,
  Manufacture Date:              DEC 20 2015,
  Firmware Version:              ,
  Admin Status:                  POWER ON,
  Operational Status:            UP,
  Power Consumption:             19,
  Power Control Checksum:        0x1716,
  CPU Model Type   :             Marvell PJ4B (584) v7 (Rev 2),
  MAC Address:                   xx:xx:xx:xx:xx:xx,
  ASIC - Physical 1:             Alleycat3,
  FPGA - Physical 1:             0016/00,
  UBOOT Version :                n/a,
  UBOOT-miniboot Version :       6.7.2.113.R05,
  POE SW Version :               23.0211.26
Regards,
Tales

Mohammadlinux
Member
Posts: 11
Joined: 26 Jul 2018 05:38

Re: Lanpower problems on 6350

Post by Mohammadlinux » 10 Mar 2019 07:16

Hi,I was update to the last version.This is output command:

Code: Select all

->show microcode  
   Package           Release       Size     Description
-----------------+---------------+--------+-----------------------------------
KF3base.img       6.7.2.113.R05   16582339 Alcatel-Lucent Enterprise Base Softw
KF3os.img         6.7.2.113.R05    3698036 Alcatel-Lucent Enterprise OS
KF3eni.img        6.7.2.113.R05    6634341 Alcatel-Lucent Enterprise NI softwar
KF3secu.img       6.7.2.113.R05     621210 Alcatel-Lucent Enterprise Security M

Code: Select all

-> show ni 
Module in slot 1
  Model Name:                    OS6350-P24,
  Description:                   6350 24 PORT COPPER GE POE ,
  Part Number:                   903794-90,
  Hardware Revision:             16,
  Serial Number:                 U37Q0198,
  Manufacture Date:              SEP 16 2016,
  Firmware Version:              ,
  Admin Status:                  POWER ON,
  Operational Status:            UP,
  Power Consumption:             19,
  Power Control Checksum:        0xf99c,
  CPU Model Type   :             Marvell PJ4B (584) v7 (Rev 2),
  MAC Address:                   2c:fa:a2:5d:55:68,
  ASIC - Physical 1:             Alleycat3,
  FPGA - Physical 1:             0016/00,
  UBOOT Version :                n/a,
  UBOOT-miniboot Version :       6.7.2.113.R05,
  POE SW Version :               23.0211.26

Code: Select all

-> show hardware info 
CPU Type                          : Marvell PJ4B,
Flash Manufacturer                : Micron Technology, Inc.,
Flash size                        : 134217728 bytes (128 MB),
RAM Manufacturer                  : Samsung,
RAM size                          : 268435456 bytes (256 MB),
Miniboot Version                  : 6.7.2.113.R05,
Product ID Register               : 0b
Hardware Revision Register        : 31
CPLD Revision Register            : 16

Code: Select all

-> show configuration snapshot lanpower 
! Lan  Power :
But Not Solved!!!

User avatar
thermseeker
Member
Posts: 23
Joined: 08 Jul 2016 08:40

Re: Lanpower problems on 6350

Post by thermseeker » 10 Mar 2019 09:29

Hi Mohamad,

What exactly is wrong with your 6350?

Mohammadlinux
Member
Posts: 11
Joined: 26 Jul 2018 05:38

Re: Lanpower problems on 6350

Post by Mohammadlinux » 10 Mar 2019 23:30

6350-P24 stop feeding power to a group of 8 ports(port 1 to 16) after a power cycle. Just port 17 to 24 is OK!

Post Reply

Return to “OmniSwitch 6350”