Doc for Programing AA

If you wrote a good one, share it with us !
Post Reply
m0e

Doc for Programing AA

Post by m0e » 24 Aug 2007 03:27

Dear All,

Does anybody can provide Documentation for Programing Automatic Attendant. I have read the doc, but I can not understand until I have some example. If there is someone can post it would be great for our knowledge.

Regards,

User avatar
knightr1der
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1788
Joined: 16 Feb 2007 19:07
Location: Omnipresent

Re: Doc for Programing AA

Post by knightr1der » 24 Aug 2007 05:28

Please post what you want the AA to do

EG,
Main menu(A) option 1 = XXXX, 2 = YYYY 3 = new menu(B)
Menu B option 1 = ZZZZ

XXXX = 1 set
YYYY = vm
zzzz = group parallel

etc...
History repeats itself - because no one listens the first time!
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3382
Joined: 23 Sep 2004 06:47
Location: Russia

Re: Doc for Programing AA

Post by vad » 24 Aug 2007 05:56

AA on PBX or on Voice Mail (4635/4645)?

rotonpur_DUP
Member
Posts: 82
Joined: 08 Aug 2007 12:56

Re: Doc for Programing AA

Post by rotonpur_DUP » 30 Aug 2007 10:02

If it's OXE, i CAN TELL YOU SOMETHING AS I KNOW VERY SIMPLY. CREATE AN ACCESS POINT, TREE AND LEAF .CONFIGURE THE LEAF AND SPECIFY THEM FOR A TREE AND SPECIFY TREE TO AN ACCESS POINT. CREATE A PREFIX TO REACH THAT ACCESS POINT THROUGH A TRUNK GROUP.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6769
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Doc for Programing AA

Post by cavagnaro » 31 Aug 2007 00:30

rotonpur, as you know capital letter are like yelling on the internet world, so please be carefull when you make a post.
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

rotonpur_DUP
Member
Posts: 82
Joined: 08 Aug 2007 12:56

Re: Doc for Programing AA

Post by rotonpur_DUP » 31 Aug 2007 05:52

Thank you Mr. Cavagnaro, i didn't know that, and I was in hurry while i was writting that so even i noticed i didn't made that correct , thought that it's ok if it can express only what i want to mean. I will be carefull about that in future.

katyusha
Member
Posts: 2
Joined: 22 Jun 2007 21:19

Re: Doc for Programing AA

Post by katyusha » 16 Sep 2007 07:16

I have some documents for configuring A.A. but who can tell me how to upload file.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6769
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Doc for Programing AA

Post by cavagnaro » 16 Sep 2007 23:20

Just go to pastebin section....
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

kabersystem
Member
Posts: 14
Joined: 16 Jun 2016 12:15

Re: Doc for Programing AA

Post by kabersystem » 26 Mar 2017 03:54

Hello,

I also need a programming guide for utomatic attendant. The guy who installed the licence had a document but he didn't want to share with us.

I had few questions , if it is possible, but he said no, it is not possible and no comments.

Thank you.
Mihaela

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6769
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Doc for Programing AA

Post by cavagnaro » 26 Mar 2017 15:08

Download system documentation, it is available here

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Post Reply

Return to “Documentation”