Doc for Programing AA
Doc for Programing AA
Dear All,
Does anybody can provide Documentation for Programing Automatic Attendant. I have read the doc, but I can not understand until I have some example. If there is someone can post it would be great for our knowledge.
Regards,
Does anybody can provide Documentation for Programing Automatic Attendant. I have read the doc, but I can not understand until I have some example. If there is someone can post it would be great for our knowledge.
Regards,
- knightr1der
- Alcatel Unleashed Certified Guru
- Posts: 1788
- Joined: 16 Feb 2007 19:07
- Location: Omnipresent
Re: Doc for Programing AA
Please post what you want the AA to do
EG,
Main menu(A) option 1 = XXXX, 2 = YYYY 3 = new menu(B)
Menu B option 1 = ZZZZ
XXXX = 1 set
YYYY = vm
zzzz = group parallel
etc...
EG,
Main menu(A) option 1 = XXXX, 2 = YYYY 3 = new menu(B)
Menu B option 1 = ZZZZ
XXXX = 1 set
YYYY = vm
zzzz = group parallel
etc...
History repeats itself - because no one listens the first time!
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x
Re: Doc for Programing AA
AA on PBX or on Voice Mail (4635/4645)?
-
- Member
- Posts: 82
- Joined: 08 Aug 2007 12:56
Re: Doc for Programing AA
If it's OXE, i CAN TELL YOU SOMETHING AS I KNOW VERY SIMPLY. CREATE AN ACCESS POINT, TREE AND LEAF .CONFIGURE THE LEAF AND SPECIFY THEM FOR A TREE AND SPECIFY TREE TO AN ACCESS POINT. CREATE A PREFIX TO REACH THAT ACCESS POINT THROUGH A TRUNK GROUP.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Doc for Programing AA
rotonpur, as you know capital letter are like yelling on the internet world, so please be carefull when you make a post.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 82
- Joined: 08 Aug 2007 12:56
Re: Doc for Programing AA
Thank you Mr. Cavagnaro, i didn't know that, and I was in hurry while i was writting that so even i noticed i didn't made that correct , thought that it's ok if it can express only what i want to mean. I will be carefull about that in future.
Re: Doc for Programing AA
I have some documents for configuring A.A. but who can tell me how to upload file.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Doc for Programing AA
Just go to pastebin section....
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 18
- Joined: 16 Jun 2016 12:15
Re: Doc for Programing AA
Hello,
I also need a programming guide for utomatic attendant. The guy who installed the licence had a document but he didn't want to share with us.
I had few questions , if it is possible, but he said no, it is not possible and no comments.
Thank you.
Mihaela
I also need a programming guide for utomatic attendant. The guy who installed the licence had a document but he didn't want to share with us.
I had few questions , if it is possible, but he said no, it is not possible and no comments.
Thank you.
Mihaela
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Doc for Programing AA
Download system documentation, it is available here
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer