The Basics

If you wrote a good one, share it with us !
User avatar
Eliott_DUP
Member
Posts: 793
Joined: 19 Apr 2007 11:20
Location: In front of my PC

Re: The Basics

Post by Eliott_DUP » 09 Dec 2008 03:38

Not bad pemby, let me do some additional comments:

I: put out of service automatically by cyclic tests or MAO
X: put out of service manually by outserv command
T: terminal is unplugged, defective Terminal, miscall for analog stations
B: out of service due to a system bascul (normal on standby CPU until a bascul (switch to main role))
Y : out of service due to INTB loss / isolated crystal
N: Means out of service reason unknown

A: att_mserv, C: hs_defich, I: hs_isolauto, X: hs_isolman, T:hs_terdef
U: hs_usdef, P: hs_errparite, B: hs_bascul, Y: hs_cristisol, N: hs_inex
Never give up!

zainur
Member
Posts: 1
Joined: 16 Dec 2016 00:57

Re: The Basics

Post by zainur » 18 Dec 2016 23:49

Hi Everyone,

can someone help me? one of our set 4039 is out of service as per below stat:
+UA TERMINAL ----------------------------------------------------------------+
| Device: 0-15-29-0 Neqt: 622 |
| Logic number: 421 |
| Terminal type: NOE_C Locked: No |
| State: OUT_OF_SERV => A . . . . . . . . . |
| Directory number: 8870 Set type: 4039 |
| Associate directory: 8870 PIN: 0000 |
| Overflow validate: No Multiline set: Yes |
| PBX group number: none PBX state: OUTSIDE |
+-------------------------------------------------(PRESS ANY KEY TO CONTINUE)+

can someone help me?

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3457
Joined: 23 Sep 2004 06:47
Location: Russia

Re: The Basics

Post by vad » 19 Dec 2016 00:01

If board (0-15) in service - check connection.
Or change two sets - you will find - you have problem with set or connection.
Check set (cable) 0-15-28.

Post Reply

Return to “Documentation”