Hi all,
does anybody have experience with install OTMC to virtual server ?? ?
we tried it with last bootdvd-12.1.009.000-x86_64 and bootdvd-12.1.010.000-x86_64 ...
• Virtualmachinename:OTMC-V
• Operatingsystem: SUSE Linux Enterprise Server 12 (64 bits)
• Hyper-threadingmustbedeactivated: set theoptionHyperthreadedCoreSharing to None
• VMwareESXimustbe 6.0 , theVirtualMachineVersion 11( tried 10 too)
• CPU: 2 VCPUs
• RAM: 8 GB
• Network adapter: VMXNET 3
• SCSI controller: LSI Logic SAS
• Create a newvirtual disk – 105 GB (ThickProvision Lazy Zeroed) – SCSI (0:0)
then • SelectOpenTouchMessaging Center forVirtualizedInfrastructure (15000 users).
install was started, but in a part ´create partition plan ´ instalallation stopped by fault message:
device "" not found by storage backend
http://www.imgup.cz/image/Lh4n
if any idea, please reply
thanks
OTMC-V
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OTMC-V
Try to change the drive type. Scsi, ide
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: OTMC-V
Thanks Cavargnaro... I will try it and write result here
Re: OTMC-V
Hi munzik,
We had the same problem, it was about disk space. I had to put double size disk space, because I selected smooth updates in previous installation steps. I recomend you that use OTCP tool in order to size your system, then you should create your virtual machine with double space disk that OTCP said before.
Regards,
We had the same problem, it was about disk space. I had to put double size disk space, because I selected smooth updates in previous installation steps. I recomend you that use OTCP tool in order to size your system, then you should create your virtual machine with double space disk that OTCP said before.
Regards,
Re: OTMC-V
Cavargnago : We tried to change SCSI controller, but the instalation was stoppet at the same time and message fault
Jigareda : Thanks ! It could be good idea.. we will try it with 250Gb size and let you know
Jigareda : Thanks ! It could be good idea.. we will try it with 250Gb size and let you know
Re: OTMC-V
installation with 250Gb HDD without problem , thanks
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OTMC-V
Thanks for sharing
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer