OTMC-V

Post Reply
munzik
Member
Posts: 16
Joined: 12 Apr 2011 11:35

OTMC-V

Post by munzik »

Hi all,

does anybody have experience with install OTMC to virtual server ?? ?
we tried it with last bootdvd-12.1.009.000-x86_64 and bootdvd-12.1.010.000-x86_64 ...

• Virtualmachinename:OTMC-V
• Operatingsystem: SUSE Linux Enterprise Server 12 (64 bits)
• Hyper-threadingmustbedeactivated: set theoptionHyperthreadedCoreSharing to None
• VMwareESXimustbe 6.0 , theVirtualMachineVersion 11( tried 10 too)
• CPU: 2 VCPUs
• RAM: 8 GB
• Network adapter: VMXNET 3
• SCSI controller: LSI Logic SAS
• Create a newvirtual disk – 105 GB (ThickProvision Lazy Zeroed) – SCSI (0:0)

then • SelectOpenTouchMessaging Center forVirtualizedInfrastructure (15000 users).

install was started, but in a part ´create partition plan ´ instalallation stopped by fault message:
device "" not found by storage backend

http://www.imgup.cz/image/Lh4n

if any idea, please reply
thanks
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OTMC-V

Post by cavagnaro »

Try to change the drive type. Scsi, ide

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
munzik
Member
Posts: 16
Joined: 12 Apr 2011 11:35

Re: OTMC-V

Post by munzik »

Thanks Cavargnaro... I will try it and write result here
jigareda
Member
Posts: 13
Joined: 19 May 2016 02:27

Re: OTMC-V

Post by jigareda »

Hi munzik,

We had the same problem, it was about disk space. I had to put double size disk space, because I selected smooth updates in previous installation steps. I recomend you that use OTCP tool in order to size your system, then you should create your virtual machine with double space disk that OTCP said before.

Regards,
munzik
Member
Posts: 16
Joined: 12 Apr 2011 11:35

Re: OTMC-V

Post by munzik »

Cavargnago : We tried to change SCSI controller, but the instalation was stoppet at the same time and message fault

Jigareda : Thanks ! It could be good idea.. we will try it with 250Gb size and let you know
munzik
Member
Posts: 16
Joined: 12 Apr 2011 11:35

Re: OTMC-V

Post by munzik »

installation with 250Gb HDD without problem , thanks :-)
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OTMC-V

Post by cavagnaro »

Thanks for sharing

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Post Reply

Return to “OTMC - OpenTouch Message Center”