Hi all,,
I have configured the loopback0 interface as below :
-> ip int Loopback0 address 10.240.70.1
-> sh ip int
Total 2 interfaces
Flags (D=Directly-bound)
Name IP Address Subnet Mask Status Forward Device Flags
--------------------------------+---------------+---------------+------+-------+---------+------
Loopback 127.0.0.1 255.255.255.255 UP NO Loopback
Loopback0 10.240.70.1 255.255.255.255 UP YES Loopback0
but I still can't access to the switch.
if I configure the same IP as Vlan 1 interface, I could access to the switch
Name IP Address Subnet Mask Status Forward Device Flags
--------------------------------+---------------+---------------+------+-------+---------+------
Loopback 127.0.0.1 255.255.255.255 UP NO Loopback
vlan1 10.240.70.1 255.255.255.0 UP YES vlan 1
Is there any other configuration to be done to be able to access the switch through Loopback0 interface, please help,,,
Regards,,