SFP

Post Reply
Enwary
Member
Posts: 20
Joined: 18 Jun 2018 05:35

SFP

Post by Enwary » 13 Oct 2019 07:18

Hello all...
I have connected non alcatel SFP 10 G 80 Km on two switches and connect them by fiber....show interface command shows the interface as copper...Is there any configuration to tell the switches that the midia is fiber not copper...also when I make speed test between the switches it shows very slow speed..about 70 Mbps...please help...
thanks in advance...

Post Reply

Return to “OmniSwitch 6560”