How to disable Trap Notify

Post Reply
MoeJoe
Member
Posts: 1
Joined: 19 Jun 2018 03:25

How to disable Trap Notify

Post by MoeJoe » 21 Jun 2018 08:39

Hy all,

we've got a running omnivista v4.2.2.

i got the Problem that i want to ignore a couple of traps.
but how to configure it ?
ive tried it within the Notificaions -> Trap config.....

but without any effort.

so if someone can give me a hint how to do this it will be great.

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1196
Joined: 01 Jul 2008 10:51
Location: Germany

Re: How to disable Trap Notify

Post by silvio » 22 Jun 2018 10:01

there are two ways:
You can set filters in the switches for all unwanted traps. Per default all traps are enabled. With the filter you can decide per snmp receiver (omnivista) which trap to disable.
Or you receives all the traps within omnivista and there you can create an "auto-acknowledge" off all unwanted traps. This feature is in trap-responder with action "acknowledge". You can create your own specific filters with a lot of possibilities.

With trap definition you can "only" change the severity of a trap: f.e. if you change from warning to normal the switch icon will not change the color to orange.
regards
Silvio

User avatar
benny
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 745
Joined: 20 Oct 2007 14:51
Contact:

Re: How to disable Trap Notify

Post by benny » 28 Jun 2018 05:15

I'd build a trap responder that auto-acknowledges the traps that you're not interested in.
Regards,
Benny

Post Reply

Return to “OmniVista 2500 v4.x”