Hi guys,
Please help me, i have a confuse with Ov2500nms
Do OV2500NMS support to roaming between 2 OV2500NMS have same radius server ( PMS)
One OV2500NMS for villas, one for hotel, guest must checkin at hotel area first and moving to villas, can wireless client roaming between 2 areas?
Roaming between two OV2500NMS
Re: Roaming between two OV2500NMS
I don't think that roaming without interrupt is possible. Maybe the users didn't notice any interrupt - but the devices has to authenticate in the new environment again. With overlapping wireless covers I would suggest not to use different omnivista.
This setup is very unusual. OV is for management. With one Radius-server, why did you use two omnivista-servers?
best regards
Silvio
This setup is very unusual. OV is for management. With one Radius-server, why did you use two omnivista-servers?
best regards
Silvio
-
- Member
- Posts: 34
- Joined: 21 Aug 2017 05:16
Re: Roaming between two OV2500NMS
@silvio,
They want to seperate 2 areas for 2 department: hotel and villas, i think about management purpose.
They want to seperate 2 areas for 2 department: hotel and villas, i think about management purpose.
-
- Member
- Posts: 11
- Joined: 27 Jan 2019 06:27
- Location: Denmark
- Contact:
Roaming between two OV2500NMS
what will be the difference between this two layouts on Sortm Soniq ball ???
95°x3"x 60° and 95°x4"x60°
PAP 4 1/2 over 1/2 up
speed 14 mph
not sure about tilt and axis
95°x3"x 60° and 95°x4"x60°
PAP 4 1/2 over 1/2 up
speed 14 mph
not sure about tilt and axis
Re: Roaming between two OV2500NMS
maybe the wrong board.... please check it und move it to the right one.