SIP Trunking - VMWare OXE

[anbani]

Dear Admin,
I installed OXE1, OXE2 with VMWare Machine (R9.0, license full). I want to configure SIP trunking between OXE1, OXE2 and i have some questions:
1. SIP Trunking OXE1_node1 and OXE2_node2 ?
2. I don't need GD or INTIP board ?
Many thanks!

[vad]

1 - ? You need SIP TG, manage SIP gateway, external SIP GW
2 - for voice - you need GD/GA/INTIP

[anbani]

Dear vad,
Thanks for your infomation.
So, if i don't have GD/GA/INTIP, i can not Lab and make call between Node1 & Node2 ? Per node, i created 2 4068 IP phone (or 2 SIP extension) and make call is ok!

[vad]

For lab and IPTouch - I think you can test.

[Turlupin]

I think you don't need GD/GA/INTIP card if you use direct rtp and the same codec (G711, G729 ...)

[anbani]

Dear Turlupin,
Many thank for your reply,
On 2 nodes, I use the same codec G723. Can you guide me to setup "direct RTP" ? I configured SIP Trunking between Node1 & Node2 ( Node 1, ext 1002, 4068 IP and Node 2, ext 2001, 4068 IP). When i make call from 1002 to 2001, on the 4068 IP screen dislay "Network link out of service".
Waiting for everybody reply!

[Turlupin]

With mgr : IP / IP Parameters / Direct RTP --> True

If it doesn't work ... may be you be you finally need a GD/GA/INTIP ...

[cavagnaro]

Please post in correct forums.