SIP Trunk and CCD

Post by **tincho.rn** » 18 Sep 2009 16:57

Hi. I would to know if it is possible to receive calls from SIP trunk to a Pilot. I make some test without positive results. Any ideas? Thanks in advance. Regards.

Post by **tot3nkopf** » 18 Sep 2009 18:05

Why not ticho.rn? Simply translate numbers like in ISDN. I will make some tests in my lab regarding this, too.

Post by **tincho.rn** » 20 Sep 2009 08:21

Hi tot3 ... I made some test, with an without traslators without succed. I am using ABC variant for SIP trunk. I didn't test ISDN variant. I beilieve it should work, I hope so. Thanks for your answer. Best regards!!

Post by **tincho.rn** » 16 Nov 2009 14:46

Hi. Is working OK. The SIP gateway connect to OXE did not support the transfer method. However, now I am using ISDN mode for SIP and is working OK. Regards.

Alcatel Unleashed

SIP Trunk and CCD

SIP Trunk and CCD

Re: SIP Trunk and CCD

Re: SIP Trunk and CCD

Re: SIP Trunk and CCD [SOLVED]