Can't Access the console port
-
- Member
- Posts: 10
- Joined: 01 Jul 2008 20:19
Can't Access the console port
We have a OmniAccess 4308 and we don't have to access the console port. We all try the possible way based on what document said but sad to say nothing could be happened. Is there someone who can teach me the other way around to access the console port or do you thing that the console port having a problem?
Can you share the pin console cable configuration... tnx a lot for those people who answer my big problem..
Can you share the pin console cable configuration... tnx a lot for those people who answer my big problem..
-
- Member
- Posts: 10
- Joined: 01 Jul 2008 20:19
Re: Can't Access the console port
thanks sir benny for your great advice...
We have an other problem, we don't know the default password on this device. Can you advice what is the default password? tnx again
We have an other problem, we don't know the default password on this device. Can you advice what is the default password? tnx again
Re: Can't Access the console port
Well,
You have set up the password during the "initial configuration" phase of the device.
Ask the person who did that or use password recovery method.
You have set up the password during the "initial configuration" phase of the device.
Ask the person who did that or use password recovery method.
Regards,
Benny
Benny
-
- Member
- Posts: 10
- Joined: 01 Jul 2008 20:19
Re: Can't Access the console port
Sir how I do that, when everytime enter the console management they ask me to enter the password. But the problem I don't know the password.
Next time i will post the screen shot.
Next time i will post the screen shot.
Re: Can't Access the console port
Do the following on the serial connection:
Edit:
I had been asked to remove this.
Edit:
I had been asked to remove this.
Last edited by benny on 25 Jul 2008 12:35, edited 1 time in total.
Regards,
Benny
Benny
-
- Member
- Posts: 10
- Joined: 01 Jul 2008 20:19
Re: Can't Access the console port
thank you so much sir benny, you're the great teacher on alcatel!!!
-
- Member
- Posts: 10
- Joined: 01 Jul 2008 20:19
Re: Can't Access the console port
sir i have another problem, how do i configure the ap 60 or do u have a list of command to configure the ap 60?
Re: Can't Access the console port
The topic "configure" is to big to answer this question like this.
Please read the documentation first.
Please read the documentation first.
Regards,
Benny
Benny
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Can't Access the console port
Eh..by the way we do not allow passwords posted...
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer