Hi,
Is there any method to perform cable test via snmp? OIDs that I found are not working. Please help
Perform TDR via snmp
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Perform TDR via snmp
Are you familiar with OSI layer?
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Perform TDR via snmp
Yes. What do you mean?
Re: Perform TDR via snmp
There is a way to perform cable diagnostic via snmp on d-link switches with number of OIDs specified for that. Does os 6200 have same functional?
Re: Perform TDR via snmp
I found that linxys oids are working well
Check is port ready for test:
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.1.1.1.$port
1-yes 2-no
launch test:
snmpset [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.1.1.1.$port i 2
What port can return
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.2.1.1.$port
1.3.6.1.4.1.89.90.1.2.1.1.$port.2 2
1.3.6.1.4.1.89.90.1.2.1.1.$port.3 3
rlPhyTestTableCableStatus(2),
rlPhyTestTableCableFault(3),
Test status
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.2.1.2.$port
1.3.6.1.4.1.89.90.1.2.1.2.$port.2 2
1.3.6.1.4.1.89.90.1.2.1.2.$port.3 2
{none(1), success(2),inProgress(3),notSupported(4),unAbleToRun(5), aborted(6),failed(7)}
Test result
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.2.1.3.3
1.3.6.1.4.1.89.90.1.2.1.3.$port.2 4 result
4_pair_cable(1), 2_pair_cable(2), no_cable(3), open_cable(4), short_cable(5), bad_cable(6), impedance_mismatch(7)
1.3.6.1.4.1.89.90.1.2.1.3.$port.3 53 cable length
last test time
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.2.1.6.$port
1.3.6.1.4.1.89.90.1.2.1.6.$port.2 "10-Jun-2016 07:37:46 "
1.3.6.1.4.1.89.90.1.2.1.6.$port.3 "10-Jun-2016 07:37:46 "
close topic please
Check is port ready for test:
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.1.1.1.$port
1-yes 2-no
launch test:
snmpset [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.1.1.1.$port i 2
What port can return
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.2.1.1.$port
1.3.6.1.4.1.89.90.1.2.1.1.$port.2 2
1.3.6.1.4.1.89.90.1.2.1.1.$port.3 3
rlPhyTestTableCableStatus(2),
rlPhyTestTableCableFault(3),
Test status
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.2.1.2.$port
1.3.6.1.4.1.89.90.1.2.1.2.$port.2 2
1.3.6.1.4.1.89.90.1.2.1.2.$port.3 2
{none(1), success(2),inProgress(3),notSupported(4),unAbleToRun(5), aborted(6),failed(7)}
Test result
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.2.1.3.3
1.3.6.1.4.1.89.90.1.2.1.3.$port.2 4 result
4_pair_cable(1), 2_pair_cable(2), no_cable(3), open_cable(4), short_cable(5), bad_cable(6), impedance_mismatch(7)
1.3.6.1.4.1.89.90.1.2.1.3.$port.3 53 cable length
last test time
snmpwalk [OPTIONS] 172.*.*.* 1.3.6.1.4.1.89.90.1.2.1.6.$port
1.3.6.1.4.1.89.90.1.2.1.6.$port.2 "10-Jun-2016 07:37:46 "
1.3.6.1.4.1.89.90.1.2.1.6.$port.3 "10-Jun-2016 07:37:46 "
close topic please