PRAT2 configuration

Post Reply
Xamuko
Member
Posts: 31
Joined: 15 Jan 2014 15:43

PRAT2 configuration

Post by Xamuko » 03 Jan 2018 15:56

Hi guys,

A service provider gave me the following to config in my oxo:

Type E1: PRI-ISDN
channels: 15
Codec type: HDB3 (High Density Bipolar of order 3 code)
Framing: No-cr4
Direction of bchannel: Ascendant
Impedance type: 75 Ohm
Clock: Slave

Also they provided me with the cross cable diagram.

Now..i have configured the oxo with the image you see in attachments.

However, something is missing and i'm not sure what it is...I've also added the board to the trunk group.

Any help would be great!.
You do not have the required permissions to view the files attached to this post.

User avatar
KoenC
Member
Posts: 11
Joined: 18 Feb 2015 10:38
Location: Belgium

Re: PRAT2 configuration

Post by KoenC » 12 Jan 2018 04:39

Hi Xamuko,

Can you define the problem? Which error message is displayed when you are trying to access the external lines?
Is the system able to access the trunk group?
Can you form/dial the number?

The OXO seems to be detecting the line, becaus the (physical) out of service box isn't ticked off.
Can you provide us with an ISDN Trace?

Good luck
If I'm ever on life support, unplug me. Then plug me back in, see if that works...

Post Reply

Return to “Beginner's questions about the OmniPCX OFFICE”