Hello there,
I'm not an installer nor telephony pro, just a guy who love technology and stuff !
A friend who work for a company that rent equipments to another companies has recuperated an OxO Compact Edition and give it to me for free (and a 4029 + 4039 phone) !!
It came with a CPU4 and a Mixed 2/4/4 boards (XMEM Daughter board with SATA HDD).
It's the first time I touch a PABX and I'm learning alone in my room
I successfully get a AA and configured subscribers.
Internal call work fine, Mailbox too.
But now I'd like to get access to external call (incoming call firstly). BUT ! I haven't T0 line at home (Nor PSTN), but I have a SIP account with 2 simultaneous lines.
The problem is : My PABX doesn't allow me to setup a connection to a SIP Trunk.
I understand that there Software Licenses limitation, but I'm lost !
Also, I read that CoCPUx can't work standalone with a Compact Edition !
But If a get the VOIP4 Daughter-board of a CoCPU2 and plug it to my CPU4 instead of XMEM daughter-board, will it work ?
I mean, is the fact of getting a VOIPx plugged on CPU board, automatically give the rights to use IP function ?
Finally, I saw the BeroNet solution, a gateway beetween SIP account and T0. But it's a little bit "expensive" just to have fun with technology without a professional use
For you, what's the best solution ?
Thank for reading, and be gentle with my french english
Belnadifia
SIP Trunk OxO CE
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: SIP Trunk OxO CE
If you don't have license maybe get an apa board which is analogic and you could use your homeland phone or connect a cheap sata sip device.
Getting license for just playing will be expensive
Enviado de meu E6633 usando Tapatalk
Getting license for just playing will be expensive
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: SIP Trunk OxO CE
since its a compact, an apa will not help... no empty slot.
he needs an amix i think... or cheaper sip t0 device. in germany we use an BeIP+ from bintec...
But i dont know if it supports your provider...
he needs an amix i think... or cheaper sip t0 device. in germany we use an BeIP+ from bintec...
But i dont know if it supports your provider...
-
- Member
- Posts: 5
- Joined: 18 Feb 2018 10:23
Re: SIP Trunk OxO CE
Thank you for your replies.
So with a APA board plugged onto a SPA112 for example, I could use my SIP account for external call ? (Incoming and outgoing ?)
But it require an empty slot on PABX, I can find some loose OxO with 3 slot for ~90€ it sound ok for me.
I think BeIP+ equal the BerNet gateway (maybe with more functions ?)
How much cost a license for SIP trunk ? (And where do you buy it ?) (curiosity, because I can't find any information about it :/)
So plug a VOIP4 DaughterBoard on CPU4 instead of XMEM one will not grant me the rights to use SIP trunk ?
So with a APA board plugged onto a SPA112 for example, I could use my SIP account for external call ? (Incoming and outgoing ?)
But it require an empty slot on PABX, I can find some loose OxO with 3 slot for ~90€ it sound ok for me.
I think BeIP+ equal the BerNet gateway (maybe with more functions ?)
How much cost a license for SIP trunk ? (And where do you buy it ?) (curiosity, because I can't find any information about it :/)
So plug a VOIP4 DaughterBoard on CPU4 instead of XMEM one will not grant me the rights to use SIP trunk ?
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: SIP Trunk OxO CE
No, the board (I am not OXO Expert and haven't touched one in like 8 years) may provide only compressors to use with voip... Not sure, but no, no board gives you license access, only hardware resources to use a license.
About license you need to contact a BP, search them at your country list directory at Alcatel-Lucent.com
Enviado de meu E6633 usando Tapatalk
About license you need to contact a BP, search them at your country list directory at Alcatel-Lucent.com
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 5
- Joined: 18 Feb 2018 10:23
Re: SIP Trunk OxO CE
I see, than you again ! (Well, I buy a CoCPU2 for nothing, but it's ok, it will be usefull one day I guess (and it cost me just ~30€))
The APA board seem to be the best solution !
Since I get an included free external call (landline and mobile) with my ISP (but they don't give SIP password, they only loan SIP phone (or SPA112) preconfigured) and I have one more SIP account (with password, but no free call)
To be sure :
-I buy an APA-4 Board
-I plug 2 FXS of preconfigured SPA112 to 2 FXO of APA-4 card
-I plug 2 FXS of my SPA112 (my SIP account) to 2 FXO of APA-4
-I can setup OxO to use my ISP phone for outgoing call and my own SIP account for incoming call ?
-No licence needed ?
EDIT :
On my CPU4 Board, there is a "SLI 1/2" port. Isn't for Analog ?
Hmm sory, now I know that SLI is for analog Terminal Only, not analog trunk
Hey, the AMIX-444-1 looks great ! Compatible with the compact Edition, 4 analog trunk, 4 analog interface and 4 digitale interface !!
The APA board seem to be the best solution !
Since I get an included free external call (landline and mobile) with my ISP (but they don't give SIP password, they only loan SIP phone (or SPA112) preconfigured) and I have one more SIP account (with password, but no free call)
To be sure :
-I buy an APA-4 Board
-I plug 2 FXS of preconfigured SPA112 to 2 FXO of APA-4 card
-I plug 2 FXS of my SPA112 (my SIP account) to 2 FXO of APA-4
-I can setup OxO to use my ISP phone for outgoing call and my own SIP account for incoming call ?
-No licence needed ?
EDIT :
On my CPU4 Board, there is a "SLI 1/2" port. Isn't for Analog ?
Hmm sory, now I know that SLI is for analog Terminal Only, not analog trunk
Hey, the AMIX-444-1 looks great ! Compatible with the compact Edition, 4 analog trunk, 4 analog interface and 4 digitale interface !!
-
- Member
- Posts: 5
- Joined: 18 Feb 2018 10:23
Re: SIP Trunk OxO CE
Sooooo !
I get a AMIX-444-1 now
I also get a Cisco SPA112 (SIP to analog phone)
But I'm not sure where to start.
Can you help me to find a documentations to setup an external acces with analog trunk ?
Thank you
I get a AMIX-444-1 now
I also get a Cisco SPA112 (SIP to analog phone)
But I'm not sure where to start.
Can you help me to find a documentations to setup an external acces with analog trunk ?
Thank you