Omni Pcx Office Small issue

[atcmatteo]

no way to login...
tried with kilo1997
then installed omc 10.8.1a and renamed expert dll

nothing solved

[maxmania]

Do you have any "console" phone? Advance reflex, 4039, 4034?

[atcmatteo]

Do you have any "console" phone? Advance reflex, 4039, 4034?

NO!

[maxmania]

Try to find in the OMC help the console cable diagram, to connect vis rs232. I think is the last option you have before you go to Lola software. if you can't find it send me a PM.

[atcmatteo]

I think the problem is between pc and pcx connection, I've FTP error, logged with wireshark seems doesn't comunicate.
Is possible in windows 7 i miss some ftp protocols?

[atcmatteo]

should be the internal cmos battery the problem??

[atcmatteo]

Finally i've found the problem and now i have acces via FTP to the omnioffice!!!

Now I have a analogic phone line to connect to this Huawei B593s-22

http://support.huawei.com/ecommunity/bbs/10176957.html

but when i connect it the line goes on, like if I'm doing a call

in this way the phone line is always busy and isn't possible to call.

What i can do? There is someting in the PBX setup to fix it or i've to connect the cable line in other way?

I hope is possible to use this configuration betwenn the Huawei router, so I can run all the office with only a gsm simcard inside it and have phone, fax and 4g internet connection

[PlanoPCX]

This looks like an OxO (not a 4200, it's a bit too recent for that). You should be OK with OMC as long as you check the older versions compatibility box as suggested by 'maxmania' earlier in this thread. What exactly is the error you are getting? Have you a UA/digital card in the system - have you a 4039 phone that you can connect through the first port - there is a limited administration menu available through the phone.

[gohar]

better late than never.... where can I get OMC 10.x please..

[rkraehen]

You can get the OMC on the ALE BP portal or via an ALE partner