OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

This is the main discussion forum, if the subject that you want to talk about is not listed around here.
Post Reply
User avatar
alex
Senior Member
Posts: 1458
Joined: 06 Jul 2004 07:27
Contact:
Contact alex

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Post by alex »

doublevand981 wrote: ↑12 Oct 2019 19:50
what diffrent between N64 and IO2 signalling mode ?
It's all written in paragraph 14.3 of TC2414.
If it looks like a duck, swims like a duck, and quacks like a duck, then it probably is a duck.
Top
doublevand981
Member
Posts: 246
Joined: 09 Apr 2009 21:38
Contact:
Contact doublevand981

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Post by doublevand981 »

Hi all

I had changed the signaling as Alex guide then restart system . the Shelfs still could not up. After that i swap the cards from main shelf and remote shelf then it worked.
But for some other remote shelfs i did the same procedure but it still down, even that i saw two INTOF2 cards can see each other (NTOF2A (INT_A ) === 0/0 === ( INT_HS)) and just SYN LED blinking but link could not inservice , just WAITLINK and REG NOT INIT.. ...

How should i troubleshoot now ??

(1)CPUa> config 2

Sun Oct 13 11:46:37 +07 2019


+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 2 | 0 | INTOF2A|---------- |ONLY OPS FILE | BAD PCMS CODE |
| 2 | 2 | NPRAE|---------- | IN SERVICE | 3BA23254AAAD03 |
| 2 | 4 | NPRAE|---------- | IN SERVICE | 3BA23254AAAD03 |
| 2 | 6 | INTOF2B|---------- | IN SERVICE | 3BA23260AAAB03 |
| 2 | 8 | NPRAE|---------- | IN SERVICE | 3BA23254AAAD03 |
| 2 | 9 | NPRAE|---------- | IN SERVICE | 3BA23254AAAD03 |
| 2 | 11 | eUA32|---------- | REG NOT INIT | BAD PCMS CODE |
| 2 | 12 | eZ32_2|---------- | IN SERVICE | BAD_PCMS_CODE |
| 2 | 13 | eZ32|---------- | IN SERVICE | 3BA23265ABCB01 |
| 2 | 14 | GPA2|---------- | IN SERVICE | 3BA23241AAAC03 |
| 2 | 15 | INTOF2A|---------- | WAIT LINK | 3BA23260AAAB03 |
| 2 | 17 | INTOF2A|---------- |ONLY OPS FILE | BAD PCMS CODE |
| 2 | 19 | INTOF2A|---------- | IN SERVICE | 3BA23260AAAB03 |
| 2 | 20 | INTOF2B|---------- | IN SERVICE | 3BA23260AAAB03 |
| 2 | 22 | INTOF2A|---------- | WAIT LINK | 3BA23260AAAB03 |
| 2 | 24 | INTOF2A|---------- | WAIT LINK | 3BA23260AAAB03 |
| 2 | 26 | INTOF2A|---------- | IN SERVICE | 3BA23260AAAB03 |
| 2 | 27 | NPRAE|---------- | IN SERVICE | 3BA23254AAAD03 |
+-------------------------------------------------------------------+

--- Inter Crystal Topology ---

+-------------------------------------------------------------------------+
| CR | CPL Type Role Free/Tot Role Type CPL | CR |
|-------------------------------------------------------------------------|
|002 | 06 -INTOF2B (MAIN ) --- 74/78 --- ( INT_A) INTOF2A - 22 |000 |
|-------------------------------------------------------------------------|
|002 | 20 -INTOF2B (STANDBY) === 78/78 === ( INT_A) INTOF2A - 17 |000 |
|-------------------------------------------------------------------------|
|002 | 26 -INTOF2A (INT_A ) === 120/120=== ( INT_A) INTOF2A - 19 |000 |
|-------------------------------------------------------------------------|
|002 | 15 -INTOF2A (INT_A ) === 0/0 === ( INT_HS) INTOF2B - 07 |011 |
|-------------------------------------------------------------------------|
|002 | 24 -INTOF2A (INT_A ) === 0/0 === ( INT_HS) INTOF2B - 01 |011 |
|-------------------------------------------------------------------------|
|002 | 19 -INTOF2A (INT_A ) === 78/78 === ( MAIN) INTOF2B - 06 |012 |
|-------------------------------------------------------------------------|
|002 | 22 -INTOF2A (INT_A ) === 0/0 === (STANDBY) INTOF2B - 20 |012 |
|-------------------------------------------------------------------------|
(1)CPUa> config 11

Sun Oct 13 11:46:44 +07 2019


+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 11 | 1 | INTOF2B|---------- | REG NOT INIT | BAD PCMS CODE |
| 11 | 6 | eZ32|---------- |ONLY OPS FILE | BAD PCMS CODE |
| 11 | 7 | INTOF2B|---------- | REG NOT INIT | BAD PCMS CODE |
| 11 | 8 | eUA32|---------- | REG NOT INIT | BAD PCMS CODE |
+-------------------------------------------------------------------+

--- Inter Crystal Topology ---

+-------------------------------------------------------------------------+
| CR | CPL Type Role Free/Tot Role Type CPL | CR |
|-------------------------------------------------------------------------|
|011 | 01 -INTOF2B (INT_HS ) -X- -X- ( INT_A) INTOF2A - 24 |002 |
|-------------------------------------------------------------------------|
|011 | 07 -INTOF2B (INT_HS ) -X- -X- ( INT_A) INTOF2A - 15 |002 |
|-------------------------------------------------------------------------|
Top
doublevand981
Member
Posts: 246
Joined: 09 Apr 2009 21:38
Contact:
Contact doublevand981

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Post by doublevand981 »

alex wrote: ↑13 Oct 2019 04:12
doublevand981 wrote: ↑12 Oct 2019 19:50
what diffrent between N64 and IO2 signalling mode ?
It's all written in paragraph 14.3 of TC2414.
Could you share me the doc ??
Top
User avatar
alex
Senior Member
Posts: 1458
Joined: 06 Jul 2004 07:27
Contact:
Contact alex

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Post by alex »

Here it is.
https://1drv.ms/b/s!AsNSTc6gtb8HgdR69ut ... w?e=jsSuOh
If it looks like a duck, swims like a duck, and quacks like a duck, then it probably is a duck.
Top
doublevand981
Member
Posts: 246
Joined: 09 Apr 2009 21:38
Contact:
Contact doublevand981

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Post by doublevand981 »

Hi Alex,

i facing problem related to IO2N card, It's may be failed and don't have replaced card.

our system using just 200 extension now (ip phone, dect sets, analog, 40 ibs). Could i delete IO2N board in mgr and let Dual CPU run without these board ?
pls advise me what i should to do now ?


23/10/19 16:42:50 000001M|---/--/-/---|=3:3106=Internal error in IO2 management. Address f86c65ef



23/10/19 16:42:47 000001M|000/04/-/---|=3:2048=State 0,4 coupler incoherent after CPU switch over

23/10/19 16:42:47 000001M|000/08/-/---|=3:2048=State 0,8 coupler incoherent after CPU switch over

23/10/19 16:42:47 000001M|000/09/-/---|=3:2048=State 0,9 coupler incoherent after CPU switch over

23/10/19 16:42:47 000001M|000/16/-/---|=3:2048=State 0,16 coupler incoherent after CPU switch over

23/10/19 16:42:47 000001M|000/00/-/---|=3:2048=State 0,0 coupler incoherent after CPU switch over
Top
User avatar
alex
Senior Member
Posts: 1458
Joined: 06 Jul 2004 07:27
Contact:
Contact alex

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Post by alex »

Your system is duplicated. Just run on another CPU-IO2N pair.
If it looks like a duck, swims like a duck, and quacks like a duck, then it probably is a duck.
Top
haroun
Senior Member
Posts: 1355
Joined: 29 Mar 2010 11:09

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Post by haroun »

is this issue resolved
011 | 01 -INTOF2B (INT_HS ) -X- -X- ( INT_A) INTOF2A - 24 |002 |
|-------------------------------------------------------------------------|
|011 | 07 -INTOF2B (INT_HS ) -X- -X- ( INT_A) INTOF2A - 15 |002 |
swap also those boards
Top
Post Reply

Return to “MAIN”