Dear team,
I have 4 alcatel 6860 u 28, release 8.4.1.299.R02 GA switch need to be stacking, i am completely new to this alcatel world, i have 40gi as well as 10 g in order to give the stacking, i have tried many time configuring this switch. But i have lost, can anybody help me to overcome this issue..?? I red the release note but still i am getting lot of confusion. I i have 3 vlan as mentioned below
Vlan 999 management
Ip interface 192.168.50.1/24
Vlan 10 cctv-server
Ip interface 192.168.10.1/23
Vlan 20 storage
Ip interface 192.168.29.1/24
Kindly help me to solve this issue,
Switch stacking issue
Re: Switch stacking issue
Hi,
I have moved your post in the correct forum.
What is your real question:
1) To set up a virtual chassis (VC) of four 6860 (is like a stack) - so that you have one big switch.
2) Or to create vlans and ip interfaces?
1) please explain you setup with the 10G/40G more in detail - which ports of which chassis-number (1-4) should be the vfl?
2) f.e. use the following commands (but first create the VC correct):
vlan 999 name management
ip interface IF999 address x.x.x.x/24 vlan 999
regards
Silvio
I have moved your post in the correct forum.
What is your real question:
1) To set up a virtual chassis (VC) of four 6860 (is like a stack) - so that you have one big switch.
2) Or to create vlans and ip interfaces?
1) please explain you setup with the 10G/40G more in detail - which ports of which chassis-number (1-4) should be the vfl?
2) f.e. use the following commands (but first create the VC correct):
vlan 999 name management
ip interface IF999 address x.x.x.x/24 vlan 999
regards
Silvio
-
- Member
- Posts: 7
- Joined: 26 Mar 2020 08:32
Re: Switch stacking issue
Dear silvo,
I want To set up a virtual chassis (VC) of four 6860. Now i have successfully configured 3 6860 and given the vlan interface to manage the switch.. i want to add one more switch to the existing vc. How can add??
I want To set up a virtual chassis (VC) of four 6860. Now i have successfully configured 3 6860 and given the vlan interface to manage the switch.. i want to add one more switch to the existing vc. How can add??
Re: Switch stacking issue
Remove all the vc-files in the new one, power down it, connect it to the VC and power up.
regards
Silvio
regards
Silvio