I Turn rn on calling name presentation under system -> other system param -> external system parameters. As well as i allowing Calling name display (CNIP/I-CNAM) in the phone features class of service
(1)ahqoxe2> t3
--> Cleaning mtracer...
--> Positionning t3 filters...
+--------+-------+--------+--------+---------+---------+----------+------+
| filter | desti | src_id | cr_nbr | cpl_nbr | us_term | term_nbr | type |
+--------+-------+--------+--------+---------+---------+----------+------+
| 0 | ** | ** | * | ** | * | *** | 165 |
| 1 | ** | ** | * | ** | * | *** | 166 |
| 2 | ** | ** | * | ** | * | *** | 167 |
| 3 | | | | | | | |
| 4 | | | | | | | |
| 5 | | | | | | | |
| 6 | | | | | | | |
| 7 | | | | | | | |
+--------+-------+--------+--------+---------+---------+----------+------+
Traces Analyser activated
mtracer started ...
(998213:000001:02868) MTRACER host (172.16.0.10, ahqoxe2), version: R12.4-m5.204-80-f-in-c0s1
(998213:000001:02868) MTRACER num: 003, time: 2022/02/17 21:16:27, loss: 0%
______________________________________________________________________________
| (998476:000002:03464) Concatenated-Physical-Event :
| long: 89 desti: 0 source: 0 cryst: 6 cpl: 9 us: 0 term: 0 type a5
| tei: 0 >>>> message received : SETUP [05] Call ref : 01 b1
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[18] CHANNEL (l=3) a9 83 81 -> T2 : B channel 1 exclusive
| IE:[1c] FACILITY (l=43)
| [91] Discriminator of supplementary service applications
| [aa] NFE (l=6):
| [80] Source Entity (l=1) End_PTNX
| [82] Destination Entity (l=1) End_PTNX
| [8b] Interpretation APDU (l=1): DISCARD (0)
| [a1] INVOKE (l=29):
| Invoke Ident. : 0b6c (2924)
| OP: ECMA RO_CALLING_NAME (0)
| [30] Sequence (l=17)
| [80] Name presentation allowed (l=15) 'AHQ SWITCH ROOM'
| [80] Context specific (l=15)
| IE:[6c] CALLING_NUMBER (l=6) -> 09 80 Num : 4466
| IE:[70] CALLED_NUMBER (l=2) -> 80 Num : 4
| IE:[7d] HLC (l=2) 91 81
|______________________________________________________________________________
______________________________________________________________________________
| (998476:000004:03429) 3429: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 26 desti: 0 source: 15 cryst: 6 cpl: 9 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : STATUS [7d] Call ref : 81 b1
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 80 e3 1c -> [e3]
| INFORMATION ELEMENT NON-EXISTENT OR NOT IMPLEMENTED
| IE:[14] CALL_STATE (l=1) 06
|______________________________________________________________________________
______________________________________________________________________________
| (998476:000005:03429) 3429: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 23 desti: 0 source: 15 cryst: 6 cpl: 9 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : SETUP ACK [0d] Call ref : 81 b1
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3) a1 83 81 -> T2 : B channel 1 preferred
|______________________________________________________________________________
______________________________________________________________________________
| (998478:000006:03464) Concatenated-Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 6 cpl: 9 us: 0 term: 0 type a5
| tei: 0 >>>> message received : INFORMATION [7b] Call ref : 01 b1
|______________________________________________________________________________
|
| IE:[70] CALLED_NUMBER (l=2) -> 80 Num : 4
|______________________________________________________________________________
______________________________________________________________________________
| (998481:000007:03464) Concatenated-Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 6 cpl: 9 us: 0 term: 0 type a5
| tei: 0 >>>> message received : INFORMATION [7b] Call ref : 01 b1
|______________________________________________________________________________
|
| IE:[70] CALLED_NUMBER (l=2) -> 80 Num : 9
|______________________________________________________________________________
______________________________________________________________________________
| (998483:000008:03464) Concatenated-Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 6 cpl: 9 us: 0 term: 0 type a5
| tei: 0 >>>> message received : INFORMATION [7b] Call ref : 01 b1
|______________________________________________________________________________
|
| IE:[70] CALLED_NUMBER (l=2) -> 80 Num : 8
|______________________________________________________________________________
______________________________________________________________________________
| (998483:000009:03429) 3429: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 18 desti: 0 source: 15 cryst: 6 cpl: 9 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : CALL PROC (02) Call ref : 81 b1
|______________________________________________________________________________
______________________________________________________________________________
| (998483:000010:03429) 3429: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 26 desti: 0 source: 15 cryst: 6 cpl: 9 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : ALERT (01) Call ref : 81 b1
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 80 88
| [95] Locking shift. codeset : 5
| IE:[32] EI_PARTY_CATEGORY (l=1) -> EXTENSION (1)
|______________________________________________________________________________
______________________________________________________________________________
| (998510:000011:03429) 3429: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 30 desti: 0 source: 15 cryst: 6 cpl: 9 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : CONNECT (07) Call ref : 81 b1
|______________________________________________________________________________
|
| IE:[4c] CONNECTED_NUMBER (l=6) -> 00 81 Num : 4498
| [95] Locking shift. codeset : 5
| IE:[32] EI_PARTY_CATEGORY (l=1) -> EXTENSION (1)
|______________________________________________________________________________
______________________________________________________________________________
| (998512:000012:03464) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 6 cpl: 9 us: 0 term: 0 type a5
| tei: 0 >>>> message received : CONNECT ACK (0f) Call ref : 01 b1
|______________________________________________________________________________
______________________________________________________________________________
| (998535:000013:03429) 3429: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 23 desti: 0 source: 15 cryst: 6 cpl: 9 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : DISCONNECT [45] Call ref : 81 b1
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 80 90 80 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________
______________________________________________________________________________
| (998536:000014:03464) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 6 cpl: 9 us: 0 term: 0 type a5
| tei: 0 >>>> message received : RELEASE [4d] Call ref : 01 b1
|______________________________________________________________________________
______________________________________________________________________________
| (998536:000015:03429) 3429: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 23 desti: 0 source: 15 cryst: 6 cpl: 9 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : REL COMP [5a] Call ref : 81 b1
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 80 90 80 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________
Regards
QSIG Caller name is not showing on our 8039, 8029 and 8019 phone
-
- Member
- Posts: 42
- Joined: 07 Feb 2022 07:31
- Location: Bangladesh
- Contact:
QSIG Caller name is not showing on our 8039, 8029 and 8019 phone
Regards
Md Afzal Hossain
System Admin
Md Afzal Hossain
System Admin
Re: QSIG Caller name is not showing on our 8039, 8029 and 8019 phone
Which QSIG you have configured - BC or GF?ahqswitchroom4466 wrote: ↑17 Feb 2022 10:39 I______________________________________________________________________________
| (998476:000004:03429) 3429: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 26 desti: 0 source: 15 cryst: 6 cpl: 9 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : STATUS [7d] Call ref : 81 b1
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 80 e3 1c -> [e3]
| INFORMATION ELEMENT NON-EXISTENT OR NOT IMPLEMENTED
| IE:[14] CALL_STATE (l=1) 06
|______________________________________________________________________________
OXE is ignoring IE FACILITY with Name Presentation.
If it looks like a duck, swims like a duck, and quacks like a duck, then it probably is a duck.
-
- Member
- Posts: 42
- Joined: 07 Feb 2022 07:31
- Location: Bangladesh
- Contact:
Re: QSIG Caller name is not showing on our 8039, 8029 and 8019 phone
problem solved. thanks
Regards
Md Afzal Hossain
System Admin
Md Afzal Hossain
System Admin
Re: QSIG Caller name is not showing on our 8039, 8029 and 8019 phone
and solution was ?
-
- Member
- Posts: 42
- Joined: 07 Feb 2022 07:31
- Location: Bangladesh
- Contact:
Re: QSIG Caller name is not showing on our 8039, 8029 and 8019 phone
If you configured E-1 as like qsig or isdn CLI not working. But your create your trunk as a ABCF trunk and select signal type Qsig. And this trunk group add on network routing table and ars route list. Finaly prefix creat
Prefix meaning: open routing no.
Network number: Ars route list no
Node number/ABCF trunk group: trunk group no
Prefix meaning: open routing no.
Network number: Ars route list no
Node number/ABCF trunk group: trunk group no
Regards
Md Afzal Hossain
System Admin
Md Afzal Hossain
System Admin
Re: QSIG Caller name is not showing on our 8039, 8029 and 8019 phone
having same problem, but alcatel oxe 4400 with huawei uSpace 1981 as slave exchange. Trunk group between them is QSIG trunk, now DOD and DID/ locall dialing all ok, showing number while huawei call alcatel, or vice versa but Name is not showing. Any suggestion to solve this?????
Re: QSIG Caller name is not showing on our 8039, 8029 and 8019 phone
and its done thanks