Beginners Question

[Telefonguy]

Hello,

i have a Alcatel Omnipcx Enterprice from one of our customers. But i have no idea how i should configure it.

Alize BIOS Monitor
*** BIOS Version 3EH30227ALAC bios100/011.003 ***
*** Generated on Dec/16/2008 at 11:27 ***

I try OMC 51.0.8.1 but i cant connect. (final product ist turned to OXO connect R1-R51 ADE100)

PC over Switch in (Gateway driver Processing Unit) Port LAN

Config Cable on Config Port

I can see the ip of the Unit, but when i turned my PC in the same IP Range i cant ping it and i cant connect to the pbx via OMC.

What is wrong?

[vad]

At first - we talk about OXO (and OMC) or about Enterprise (and telnet connection with CS).

[Telefonguy]

Oh, i see my mistake. You are correct this one is a Enterprise. So i have to use the CS.

[haroun]

and how did u get those info if you aren't connected to the box
Alize BIOS Monitor
*** BIOS Version 3EH30227ALAC bios100/011.003 ***
*** Generated on Dec/16/2008 at 11:27 ***

[vad]

and how did u get those info if you aren't connected to the box
Alize BIOS Monitor
*** BIOS Version 3EH30227ALAC bios100/011.003 ***
*** Generated on Dec/16/2008 at 11:27 ***

Serial connection to console port of GD?

[haroun]

indded vad that should serial connection , so he can start from here
about that bios message i don't know if it's cs bios or gd , if cs he has to boot the system and manage his pc @ipadress to trust list and eventually routing to get connection and let oxe to response to its telnet requests

[vad]

indded vad that should serial connection , so he can start from here
about that bios message i don't know if it's cs bios or gd , if cs he has to boot the system and manage his pc @ipadress to trust list and eventually routing to get connection and let oxe to response to its telnet requests

From start post "Config Cable on Config Port"
So I think that in the begining TC start works with OXE like with OXO. I hope - he has no problem now.