OXE resetting
Re: OXE resetting
That is what happens when you have cls and ground reversed - if you open the terminal emulator while connected to the oxe/gd it will reset - check your cable
Not All Those Who Wander Are Lost
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXE resetting
Well considering i was no more than 12 years old when the saw the program the fact i remember some importants stuff about it is good enought, however as you were oldie you must remember more things than meknightr1der wrote:do monkeys really have short memories? KITT was nuclear powered and not battery powered. Still, I suppose nuclear power is even more dangerous in the hands of a primatecavagnaro wrote:Don't know, but wonder what can happen to you if i invert the battery cables you have
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 3
- Joined: 19 Jun 2022 08:27
Re: OXE resetting
Thank you for your help.
Now i want to change the mtcl Passwort. But putty and hyperterminal told me root "login refused on this terminal" What can i do?
Now i want to change the mtcl Passwort. But putty and hyperterminal told me root "login refused on this terminal" What can i do?