I try to configure ntp on OS6360 but the sync never happens...
Code: Select all
OS6360 # show configuration snapshot ntp
! NTP:
ntp server clock1.ovcirrus.com iburst
ntp server clock0.ovcirrus.com iburst
ntp client admin-state enable
OS6360 # show ntp server client-list
Total: 0
IP Address Ver Key
---------------------------------------------+---+-------+
OS6360 # show ntp client server-list
Legends: + active peer, - passive peer, * current system peer,
^ broadcast server
Mode IP Address Ver Key St When Poll Reach Delay Offset Disp
----+----------------------------------------------------------------------+---+-------+----+---------+---------+-------+----------+-----------------+----------
OS6360 # show ntp client
Current time: Sun, Jul 24 2020 13:10:22.872 (CEST),
Last NTP update: -,
Server reference: INIT,
Client mode: enabled,
Broadcast client mode: disabled,
Broadcast delay (microseconds): 4000,
VRF Name: default
OS6360 # show ntp server status
Host name = clock1.ovcirrus.com,
iBurst = yes,
Status = not configured,
Host name = clock0.ovcirrus.com,
iBurst = yes,
Status = not configured,
OS6360 # ip service ntp admin-state enable
OS6360 # show ip service
Name Port Status
----------------------+-------+---------
ftp 21 enabled
ssh 22 enabled
telnet 23 enabled
http 80 enabled
ntp 123 enabled
snmp 161 enabled
radius 3799 enabled
OS6360 # ntp key load
ERROR: Unable to open keys file
OS6360 # ping clock0.ovcirrus.com
PING 0.ovcirrus.pool.ntp.org (91.224.149.41) 56(84) bytes of data.
64 bytes from eva.aplu.fr (91.224.149.41): icmp_seq=1 ttl=61 time=21.5 ms
64 bytes from eva.aplu.fr (91.224.149.41): icmp_seq=2 ttl=61 time=17.1 ms
64 bytes from eva.aplu.fr (91.224.149.41): icmp_seq=3 ttl=61 time=17.0 ms
64 bytes from eva.aplu.fr (91.224.149.41): icmp_seq=4 ttl=61 time=16.9 ms
--- 0.ovcirrus.pool.ntp.org ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 16.995/18.168/21.529/1.945 ms