"show qos queue" does not increase traffic by queues

[xuan]

Description: Alcatel-Lucent Enterprise OS6350-P10 6.7.2.113.R05 GA, December 06, 2018.,

For the attached model and realese, is there any known problem that causes the traffic by queues on the ports to not increase?

show qos queue 1/1
Slot/ Q Bandwidth Packets
Port VPN No Pri Wt Min Max Xmit Drop Type
-----+----+--+---+--+-----+-----+---------+---------+----
1/1 0 0 - 4 - - 0 0 WRR
1/1 0 1 - 1 - - 0 0 WRR
1/1 0 2 - 1 - - 0 0 WRR
1/1 0 3 - 1 - - 0 0 WRR
1/1 0 4 - 1 - - 0 0 WRR
1/1 0 5 5 - - - 0 0 PRI
1/1 0 6 - 1 - - 0 0 WRR
1/1 0 7 - 15 - - 0 0 WRR


Thanks in advance

[silvio]

because this is the 6350.... all other (more expensive) switches show there an output.
BR Silvio

[xuan]

Hi Silvio,
sorry but your answer does not convince me

In this other equipment:
Description: Alcatel-Lucent OS6250-P24 6.7.1.146.R01 GA

This inferior model and version does increase the traffic in the queues. Does not present this problem

show qos queue 1/1
Slot/ Q Bandwidth Packets
Port VPN No Pri Wt Min Max Xmit Drop Type
-----+----+--+---+--+-----+-----+---------+---------+----
1/1 0 0 - 10 - - 11408692 182028 WRR
1/1 0 1 - 1 - - 0 0 WRR
1/1 0 2 - 1 - - 0 0 WRR
1/1 0 3 - 1 - - 223 0 WRR
1/1 0 4 - 1 - - 14 0 WRR
1/1 0 5 5 - - - 158289 0 PRI
1/1 0 6 - 1 - - 19558 0 WRR
1/1 0 7 7 - - - 5041163 0 PRI

I'm still wondering if it won't be a problem with the software version 6.7.2.113.R05.
Thanks in advance

[xuan]

Hi guys,
I already have the answer.
In the CLI Reference Guide 6.7.2.R08
"In OmniSwitch 6350, Xmit/Drop counters will not be updated in the command output"

In the CLI Reference Guide 6.7.1, it does not indicate the above limitation.

I close the thread
Thank you all for your patience with me.