Nos Alarm on T2 access

Post Reply
edsonarantes
Member
Posts: 1
Joined: 01 Mar 2023 04:09

Nos Alarm on T2 access

Post by edsonarantes »

Hello,i have this problems on my Alcatel:
01/03/23 08:35:33 000001M|001/06/0/000|=4:2085=Access T2, board (1,6) : synchronization stopped
01/03/23 08:35:33 000001M|001/06/0/000|=4:2112=NOS alarm on T2 access
01/03/23 08:35:33 000001M|001/06/0/000|=2:0310=T2 Dlap Released
01/03/23 08:35:53 000001M|001/06/0/000|=4:2080=T2 access is synchronizing on Board (1,6)
01/03/23 08:35:53 000001M|001/06/0/000|=5:2102=T2 access back to normal
01/03/23 08:35:53 000001M|001/06/0/000|=4:2113=T2 lapD not established still trying
01/03/23 08:35:53 000001M|001/06/0/000|=5:0311=T2 Dlap Established

this type of error occurs randomly. Sometimes every 5 minutes sometimes every half hour and I can't figure out what could be causing it. My isp checked the line and found no problems. What could it be about?

Thanks.
Daniele
vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3807
Joined: 23 Sep 2004 06:47

Re: Nos Alarm on T2 access

Post by vad »

NOS - signal absent. Some problem with equipment between your PBX and provider.
What error have provider in the same time - NOS, RAI, AIS?
haroun
Senior Member
Posts: 1355
Joined: 29 Mar 2010 11:09

Re: Nos Alarm on T2 access

Post by haroun »

nos =no signal recived your rx is empty pbx should send RAI at least , did you perform a loop test toard provider and vice versa
Post Reply

Return to “Shelf”