Bearer Cabability on 4094 S0 via SIP Trunk (OXE)

[tomtom76]

Hi!

My Company is running a OXE with BRI Lines (ISDN), latest Software

We are runnning a Faxserver on a 4094 S0 Card, which is connected via a ISDN Card.

Incoming Faxes via BRI-Trunk (extension 666) are signaled as "3.1 kHz Voice" on the 4094 and our ISDN Fax is receiving them fine.
Incoming Faxes via SIP-Trunk (extension 666) are signaled as "Speech" on the 4094 an our ISDN Fax rejects the call.

Is there a way to change this behavour?
We need to change the Bearer Cabability for the internal S0 Bus (ISDN) (but only for calls coming from the SIP Trunk)

thank you for support
tom

[frank]

Under the ARS Route, I think you can add some signaling at the bottom of the page.