name display problem on 4019 and 4029 digital sets

[Man]

Hello all,
Can anyone help me to configure this
I am having R7 OXE crystal. If I Put name for the analog extension and this extension is calling to 4029 digital set, it is showing only number and not the name which Ihave configured. But this is not the case with 4035 attendent, it is showing the name after answering the call.
Overall calling party name is not displaying for outgoing and incoming on 4019 and 4029 while one analog extension is calling.

[prasanna_s3]

Hi

can u try this parameter in Phone facility categories

Virtual set on CMP board = 1( default 0)

[Man]

Thanks for reply
Yes dear I have tried this option setting to 1, but its not working. pls suggest another solution if any........

[Man]

Hi,
I have changed the parameter in Phone facility categories

Virtual set on CMP board = 0( default 0).... and found its working... Names are displaying on digital sets

Also I have checked the following setting
System--> Consult Modify--->
Display call name on calling set- true.

Any way thanks for your resopnce......Man

[Khaled]

I have a similar problem, we can't display both the number and the name on the screen telephone set 8028 as usual in digital set (8068 , ...) soany one here has a solution for it ..Thanks

[mdhussainvlr]

Hi Khalid,

Its not possible to display both name and number on 8028 as it is having the possibility to show either name or number


Sent from my iPhone using Tapatalk