CLIP Problem
-
- Member
- Posts: 178
- Joined: 22 Jun 2008 16:41
- Location: Germany
CLIP Problem
Hi,
i have a strange problem on an OXE Rel 7.1 Common Hardware.
I have some analog sets with the CLIP-Feature.
Everything works fine (I see the number of the caller etc.).
But when i take off the handset and hang it up again the set rings one short time.
It doesn't matter if there was a conversation or not the set rings everytime...
Thanks
i have a strange problem on an OXE Rel 7.1 Common Hardware.
I have some analog sets with the CLIP-Feature.
Everything works fine (I see the number of the caller etc.).
But when i take off the handset and hang it up again the set rings one short time.
It doesn't matter if there was a conversation or not the set rings everytime...
Thanks
Re: CLIP Problem
Hello,
Is the issue being faced right from the day of installation or has it crept up in between?
with regards,
Is the issue being faced right from the day of installation or has it crept up in between?
with regards,
-
- Alcatel Unleashed Certified Guru
- Posts: 929
- Joined: 30 Jan 2006 09:40
- Location: Argentina
- Contact:
Re: CLIP Problem
Hi. Did you modified any timer under "Z board audio parameters"? Regards.
ACSE R11
OT R2.0
OT R2.0
-
- Member
- Posts: 178
- Joined: 22 Jun 2008 16:41
- Location: Germany
Re: CLIP Problem
Hi,
the problem was from the day of installation.
I have checked the settings according to the documentation and they are all right.
the problem was from the day of installation.
I have checked the settings according to the documentation and they are all right.
-
- Alcatel Unleashed Certified Guru
- Posts: 929
- Joined: 30 Jan 2006 09:40
- Location: Argentina
- Contact:
Re: CLIP Problem
Hi. From mgr / system/ download hierarchy / Z audio parameters. Can you upload a capture of the variables here. Regards.
ACSE R11
OT R2.0
OT R2.0
-
- Member
- Posts: 178
- Joined: 22 Jun 2008 16:41
- Location: Germany
Re: CLIP Problem
Off Hook Validation Time : 12 ³
³ On Hook Valid.For Decad.Time : 40 ³
³ Max.Dur.Active Phase : 8 ³
³ Min.Dur.Active Phase : 1 ³
³ Max.Dur.Inactive Phase : 8 ³
³ Min.Dur.Inactive Phase : 1 ³
³ Min.Dur.InterDigit Decadic : 20 ³
³ Earth Button Valid Dur : 10 ³
³ Filtering After On Hook Dur : 40 ³
³ Min.Dur Loop Break Hookflash : 3 ³
³ Max.Dur.Loop Break Hookflash : 18 ³
³ Rec.Gain For QDSP : 108 ³
³ Rec.Send Gain For QDSP : 160 ³
³ Send_Gain_For_QDSP : 51 ³
³ GDSP Echo B9 : 0 ³
³ GDSP Echo B10 : 0 ³
³ GDSP Echo B11 : 0 ³
³ GDSP Echo B12 : 0 ³
³
³ On Hook Valid.For Decad.Time : 40 ³
³ Max.Dur.Active Phase : 8 ³
³ Min.Dur.Active Phase : 1 ³
³ Max.Dur.Inactive Phase : 8 ³
³ Min.Dur.Inactive Phase : 1 ³
³ Min.Dur.InterDigit Decadic : 20 ³
³ Earth Button Valid Dur : 10 ³
³ Filtering After On Hook Dur : 40 ³
³ Min.Dur Loop Break Hookflash : 3 ³
³ Max.Dur.Loop Break Hookflash : 18 ³
³ Rec.Gain For QDSP : 108 ³
³ Rec.Send Gain For QDSP : 160 ³
³ Send_Gain_For_QDSP : 51 ³
³ GDSP Echo B9 : 0 ³
³ GDSP Echo B10 : 0 ³
³ GDSP Echo B11 : 0 ³
³ GDSP Echo B12 : 0 ³
³
-
- Alcatel Unleashed Certified Guru
- Posts: 929
- Joined: 30 Jan 2006 09:40
- Location: Argentina
- Contact:
Re: CLIP Problem
Hi. It seems OK. Different from my country, but it looks OK. Sorry, I can no t help you any more. I am sure someone else sill help you. If you find the solution, post it here. Regards,.
ACSE R11
OT R2.0
OT R2.0
Re: CLIP Problem
Hello;
i have the same problem with R9 patch 34, did someone find the solution ?
thank you
i have the same problem with R9 patch 34, did someone find the solution ?
thank you
Re: CLIP Problem
Solved with the config found on the forum
so cool !!
so cool !!
-
- Member
- Posts: 178
- Joined: 22 Jun 2008 16:41
- Location: Germany
Re: CLIP Problem
Could you please post a link for this documentation?