OXO SIP Register on OXE
OXO SIP Register on OXE
Hi guys, i need some help here.
I'm trying to connect an OXO R7.1 to an OXE R8 using SIP. The idea is to register the OXO PBX in OXE for security reasons.
I can see that OXO is registered in OXE by "sipregister" command but i can't call extensions from OXO to OXE.
I've tried with xlite softphone and works fine, it register and can call to any extension on OXE.
I made traces using wireshark and i can see that when oxo sends an INVITE, OXE responds with a "Trying" message and inmediately OXE sends a "407 Proxy Athentication Required".
The difference between OXO and Xlite is that after that 407 message Xlite sends an ACK and another INVITE message with success. On the contrary after that 407 message, OXO sends an ACK and another rejected INVITE.
OXO IP: 192.168.92.246
OXE IP: 192.168.92.100
XLITE IP: 192.168.92.91
As you can see on traces above.
I'm trying to connect an OXO R7.1 to an OXE R8 using SIP. The idea is to register the OXO PBX in OXE for security reasons.
I can see that OXO is registered in OXE by "sipregister" command but i can't call extensions from OXO to OXE.
I've tried with xlite softphone and works fine, it register and can call to any extension on OXE.
I made traces using wireshark and i can see that when oxo sends an INVITE, OXE responds with a "Trying" message and inmediately OXE sends a "407 Proxy Athentication Required".
The difference between OXO and Xlite is that after that 407 message Xlite sends an ACK and another INVITE message with success. On the contrary after that 407 message, OXO sends an ACK and another rejected INVITE.
OXO IP: 192.168.92.246
OXE IP: 192.168.92.100
XLITE IP: 192.168.92.91
As you can see on traces above.
You do not have the required permissions to view the files attached to this post.
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: OXO SIP Register on OXE
Post external gateway configuration in OXE and SIP config parameters in OXO + ARS configuration.
Looks to me as an authentication problem.
Looks to me as an authentication problem.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXO SIP Register on OXE
In OXE SIP Gateway try to disable authentication and try again.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: OXO SIP Register on OXE
With authentication disabled works fine, but with authentication enabled works fine with xlite.
I also did tests using the same user for Xlite and oxo with authentication. In the case of xlite works fine as in the trace, it register and authenticate, but in oxo gives me the message 407.
Therefore i think the problem is on OXO side and not OXE.
I'm uploading OXO SIP Config.
I also did tests using the same user for Xlite and oxo with authentication. In the case of xlite works fine as in the trace, it register and authenticate, but in oxo gives me the message 407.
Therefore i think the problem is on OXO side and not OXE.
I'm uploading OXO SIP Config.
You do not have the required permissions to view the files attached to this post.
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: OXO SIP Register on OXE
Are you sure that user name and password are the same (required) in OXO and external gateway in OXE?
Re: OXO SIP Register on OXE
yes 100%. I tried the same user and pass with Xlite and works perfect!
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: OXO SIP Register on OXE
Try without authentication towards OXO and authentication towards OXE. What is the result?
Re: OXO SIP Register on OXE
The OXO doesn't register even. OXE sends a "401 Unauthorized" message.
I think that something is missing in the OXO configuration but i can't figure out where.
I think that something is missing in the OXO configuration but i can't figure out where.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXO SIP Register on OXE
Try to compare what XLite sends as username and what does OXO sends as username, there must be some mismatch.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: OXO SIP Register on OXE
The username is the same in both cases. But one difference that i saw is in Request-Line. Oxo sends "INVITE sip:2000@192.168.92.100; user=phone SIP/2.0" and Xlite sends "INVITE sip:2000@192.168.92.100 SIP/2.0". I don't know what's that 'user=phone' and if i can change or remove it.
Then in Proxy-Authorization the username, and the other parameters are the same, as you can see on traces.
Then in Proxy-Authorization the username, and the other parameters are the same, as you can see on traces.