4XX8EE Phones with Asterisk

MM-P · Post by **MM-P** » 31 Oct 2010 08:53

Yes it only was the parameter:
"supported_language=0"

Alcatel documented it wrong with "language=0".

But now it works!!! Thank you very much!!!

R2D2 · Post by **R2D2** » 10 Nov 2010 11:05

Hi all,
I'm having the same pb.
Trying to use IPTouch 4018 in SIP mode, i get 'Invalid parameters !' and reset.
The phone download sipconfig.txt and sipconfig-adrrMAC.txt but on the syslog server i get:

Nov 10 16:58:55 alcaphone-1 00:00:00 000-00:00:15.310 INIT : Checking Mandantory Parameter: telnet_passwd Invalid !

But telnet_password is set, i also tried telnet_passwd but no way ...

I'm using sip version 1.10.91.
Anyone can help ?

Second Post: (Edited by Benny)

i also had

user.info:Nov 10 17:07:19 alcaphone-dyn-1 00:00:00 000-00:00:35.170 INIT : sipconfig_init: missing mandatory CS polling timer

in the log.
I don't see which parameter i forgot ... i put
binary_polling_timer=10
config_polling_timer=10

but no way ...

Third post: (Edited by Benny)
Hi again,
do you have anything else than
APPLICATION_TYPE=APPL_SIP
in your lanpbx.cfg ?

R2D2 · Post by **R2D2** » 10 Nov 2010 11:09

i also had

user.info:Nov 10 17:07:19 alcaphone-dyn-1 00:00:00 000-00:00:35.170 INIT : sipconfig_init: missing mandatory CS polling timer

in the log.
I don't see which parameter i forgot ... i put
binary_polling_timer=10
config_polling_timer=10

but no way ...

R2D2 · Post by **R2D2** » 10 Nov 2010 11:15

Hi again,
do you have anything else than
APPLICATION_TYPE=APPL_SIP
in your lanpbx.cfg ?

R2D2 · Post by **R2D2** » 15 Nov 2010 03:36

Hi all,
got it working with Reynoud sipconfig.txt.
Official alcatel doc "sip phone installation guide" doesn't have the correct variable and section for firmware (1.x).

Thanks

gigiborro · Post by **gigiborro** » 23 Nov 2010 05:11

same problem with
Checking Mandantory Parameter: telnet_passwd Invalid !

any idea??

gigiborro · Post by **gigiborro** » 23 Nov 2010 05:19

I need sample config.... But i´ve not privileges to download Reynoud sipconfig.txt.

R2D2 · Post by **R2D2** » 23 Nov 2010 10:44

Hi,
here's Reynoud sample config file

Code: Select all

###########################################################################

#                                                                         #

#         4008EE / 4018EE SIP-Touch sets configuration file               #

#         SIP : 2.00.81 & 2.00.90                                         #

#                                                                         #

# This example contains all parameters which may be managed via the       #

# config file and is in line with 3AK_29000_0285_PEZZA_17                 #

#                                                                         #

###########################################################################







###########################################################################

## Syntax informations :

##

## All parameters are grouped by sections (the section name is specified

## with the syntax [section1]). The content is UTF-8 encoded

## Each configuration item uses a single line with a "key=value" pattern

## "Key" content starts at the first none-space character and ends with "="

## or " ="

## "Value" content starts at the first none-space character and ends at the

## "\n\r"

## If the value is empty, the terminal should use the default value instead

## Lines starting with "#" will be ignored as a comment 

## The items of a list are separated by a ","

###########################################################################





[dns]



###########################################################################

## The primary DNS IP address HAS TO BE FILLED

## If no DNS, use the SIP proxy address instead

###########################################################################

	dns_addr=192.168.178.1

	dns2_addr=

	hostname=fritz.box





[sip]



###########################################################################

## Domain name : IP address, FQDN or domain name (see the SIP proxy config)

###########################################################################

	domain_name=192.168.178.1

###########################################################################

## Primary SIP proxy and SIP registrar settings

##

## Proxy address : IP address, FQDN or domain name

## Registrar address : IP address, FQDN or domain name (usually, the proxy)

## SIP proxy UDP port : usually 5060

## SIP registrar UDP port : by default 5060

###########################################################################

	proxy_addr=192.168.178.1

	proxy_port=5060

	registrar_addr=192.168.178.1

	registrar_port=5060

	outbound_proxy_addr=

	outbound_proxy_port=

###########################################################################

## Redundancy settings

##

## Proxy address : IP address, FQDN or domain name

## Registrar address : IP address, FQDN or domain name (usually, the proxy)

## SIP proxy UDP port : usually 5060

## SIP registrar UDP port : by default 5060

## sip_transport_mode_survi : Transport mode in PCS mode 

##		    0 = UDP or TCP

##                  1 = UDP

##                  2 = TCP

###########################################################################

	proxy2_addr=192.168.178.1

	proxy2_port=5060

	registrar2_addr=192.168.178.1

	registrar2_port=5060

	outbound_proxy2_addr=

	outbound_proxy2_port=

	pcs_addr=192.168.178.1

	pcs_port=5060

	sip_transport_mode_survi=0

	option_timer=120

###########################################################################

## Global SIP parameters

## Transport mode : 0 = UDP or TCP

##                  1 = UDP

##                  2 = TCP

## local_rtp_port : RFC3605 is not supported in this release, so 

##                  only default value can be used

## PRACK type : 0 = PRACK supported

##              1 = PRACK required

##              2 = PRACK disabled

## Codec settings : 0 = G711 (PCMU)

##                  4 = G723.1

##                  8 = G711 (PCMA)

##                 18 = G729A

###########################################################################

	register_expire=3600

	register_retry=300

	local_sip_port=

	sip_transport_mode=0

	local_rtp_port=42000

	local_rtcp_port=42001

	prack_type=0

	preferred_vocoder=8,0,4,18

###########################################################################

## SIP authentication. 

##

## Realm : If no authentication, leave empty

## Authentication name : HAS TO BE FILLED 

##                       If no authentication, PUT A VALUE LIKE none

## Authentication password : If no authentication, leave empty

###########################################################################

	authentication_realm=192.168.178.1

	authentication_name=620

	authentication_password=620

	user_name=620

	display_name=Studeerkamer

###########################################################################

## Voicemail settings

##

## Voice mail URI : directory number of the voice mail

## user name : directory number of the set

## MWI URI : complete SIP URI of the voice mail

###########################################################################

	voice_mail_uri=

	message_waiting_indication_uri=





[qos]



###########################################################################

## SIP & RTP DIFFSERV : [0,63]

## SIP QOS Tickets : 0 = disable

##		     1 = enable

## SIP QOS Tickets Target : domain name

###########################################################################

	sip_diffserv=0

	rtp_diffserv=0

	sip_qos_tickets_enable=0

	sip_qos_tickets_target=





[sntp]



###########################################################################

## SNTP server settings (can be OXE or an external server)

##

## Timezone construction : UT::60:032902:102503

##          GMT delta : 60 = + sixty minutes from GMT time

##          Daylight saving start (mmddhh) : 032902 = 29 March 2am

##          Daylight saving end (mmddhh) : 102503 = 25 October 3am 

## The daylight saving settings HAVE to be changed each year.

###########################################################################

	sntp_addr=192.168.178.1

	timezone=UT::60:032902:102503





[telnet]



###########################################################################

## Password to access the telnet session

###########################################################################

	telnet_password=000000





[arp]



###########################################################################

## Mode : 0 = ARP spoofing disabled

##        1 = ARP spoofing enabled

###########################################################################

	arp_spoofing_enable=1

	arp_spoofing_timer=30





[init]



###########################################################################

## For IP Touch with SIP binary in 1.xx, 2.00.10 and 2.00.20, equal or greater than 2.00.81

##     mode 0 = SIP

##     mode 1 = NOE

##

## For IP Touch with SIP binary 2.00.30 to 2.00.80

##     mode 0 = NOE

##     mode 1 = SIP

###########################################################################

	application_mode=0





[audio]



###########################################################################

## Tone country : 0 = English

##                1 = French

##                2 = German

##                3 = Italian

##                4 = Spanish

##                5 = Dutch

##                6 = Portuguese

## DTMF type : 0 = RFC2833

##             1 = In-band

##             2 = SIP INFO

## DTMF level / RLR handset / SLR handset / Sidetone handset : 

## 0 = 0db, 1 = +3db, 2 = +6db, 3 = -3db, 4 = -6db

## VAD / DTMF feedback / Hearing Aid : 

##       0 = VAD not used

##       1 = VAD used

###########################################################################

	tone_country=1

	dtmf_type=1

	dtmf_level=0

	dtmf_avt_payload_type=96

	vad=0

	dtmf_feedback_enable=0

	rlr_handset=0

	slr_handset=0

	sidetone_handset=2

	hearing_aid_enable=0





[appl]



###########################################################################

## Password to access the administrator menu on the phone (digits only) 

## Power priority : 1 = critical

##                  2 = high

##                  3 = low

## Time format : 0 = 24 hours format

##               1 = AM / PM

## Speed dial numbers (first and last name, URI)

###########################################################################

	admin_password=000000

	bluetooth_parameters=blue

	supported_language=0

	remote_forward_code=

	remote_forward_deactive_code=

	power_priority=

	asset_id=

	time_format=

	speed_dial_1_first_name=

	speed_dial_1_last_name=

	speed_dial_1_uri=

	speed_dial_2_first_name=

	speed_dial_2_last_name=

	speed_dial_2_uri=

	speed_dial_3_first_name=

	speed_dial_3_last_name=

	speed_dial_3_uri=

	speed_dial_4_first_name=

	speed_dial_4_last_name=

	speed_dial_4_uri=





[admin]



###########################################################################

## Global admin parameters

## Binary polling timer : 10 min - 65535 min (default 480 min)

## Config polling timer : 5 min - 65535 min (default 60 min)

###########################################################################

	binary_polling_timer=480

	config_polling_timer=60

	disable_pc_port=0

	activate_vlan_filter=0

gigiborro · Post by **gigiborro** » 23 Nov 2010 11:20

Tanks a lot!!!

with section end variable:
[telnet]
telnet_password=

My 4008 works with my Asterisk

Skullbocks25 · Post by **Skullbocks25** » 31 Jan 2011 01:37

Hi Reinoud,

I have the same problem, can you please attach the files again. Because it doesn't exist anymore on this site.

Alcatel Unleashed

4XX8EE Phones with Asterisk

It works !

Re: 4XX8EE Phones with Asterisk