OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
-
- Member
- Posts: 9
- Joined: 15 May 2009 06:06
OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
Hi,
i hope you could help me. I was going to install oxe 11.1 on esx server 5.5.
I followed official alcatel document and the information here in this board, for example the this video
https://www.youtube.com/watch?v=BfkPFWlD21E
DHCP and PXE works fine. The linux.ram file is beeing uploaded via tftp, than suddenly the virtual machine restart and the upload starts again .. loop.
i already tried smaller memory amount (128,256,512 and 1GB) in case the linux kernel goes into panic beacuse of to much ram
so far i was not able getting past the linux.ram upload.
I there anyone wo might have a suggestion or who already had this problem?
best regards
i hope you could help me. I was going to install oxe 11.1 on esx server 5.5.
I followed official alcatel document and the information here in this board, for example the this video
https://www.youtube.com/watch?v=BfkPFWlD21E
DHCP and PXE works fine. The linux.ram file is beeing uploaded via tftp, than suddenly the virtual machine restart and the upload starts again .. loop.
i already tried smaller memory amount (128,256,512 and 1GB) in case the linux kernel goes into panic beacuse of to much ram
so far i was not able getting past the linux.ram upload.
I there anyone wo might have a suggestion or who already had this problem?
best regards
Re: OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
change the disk size 30 gb not right change it to 40 and try again
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."
-
- Member
- Posts: 9
- Joined: 15 May 2009 06:06
Re: OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
hi, unfortunately it did not work with either 30gb or 40gb.
I managed to pause in the exact moment whenn the rebook occurs and i got these to lines output:
Loaded 6545719 bytes (6392 kb) successfully.
Warning : undi_close() failed 1
I managed to pause in the exact moment whenn the rebook occurs and i got these to lines output:
Loaded 6545719 bytes (6392 kb) successfully.
Warning : undi_close() failed 1
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
Weird, that time I did that video on my PC. Will try on Esx and will see if any difference. You sure those files are not corrupted?
Enviado de meu C6603 usando Tapatalk
Enviado de meu C6603 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 9
- Joined: 15 May 2009 06:06
Re: OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
That what i am beginning to think too. I just rerequested the oxe files from our supplier and will keep you informed
-
- Member
- Posts: 9
- Joined: 15 May 2009 06:06
Re: OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
Ok It realy was a corrupt file in the software I got from my vendor. I got a new Iso and it works.
For all other who wants to give it a try I got it working with the following specs:
ESXi 5.5 / Vcenter 6
Hardwareversion 10
1 CPU
1024MB RAM
40GB HDD
VMXNET3 NIC
PCInstaller 4.1
OXE 11.1 (30131.a)
PC Insaller set to Bladeserver and Network set to Corporate, than adding the MAC Adress.
We ha dto stop another PXE Server that was also running in Network for OS deployment.
For all other who wants to give it a try I got it working with the following specs:
ESXi 5.5 / Vcenter 6
Hardwareversion 10
1 CPU
1024MB RAM
40GB HDD
VMXNET3 NIC
PCInstaller 4.1
OXE 11.1 (30131.a)
PC Insaller set to Bladeserver and Network set to Corporate, than adding the MAC Adress.
We ha dto stop another PXE Server that was also running in Network for OS deployment.
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
What kind of HDD did you created on the ESX (try IDE)? Are you using the template provided by ALE?
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
What template? I tested by creating a simple one and doing same steps as on VMware desktop app and works. An IDE HD is enough.
Enviado de meu C6603 usando Tapatalk
Enviado de meu C6603 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
Yes it is. However if I am not mistaken there are also templates available with BiCS or OTBS.
However I do not think that is his issue. Maybe:
viewtopic.php?f=230&t=3777&p=17863&hili ... +1.#p17863
However I do not think that is his issue. Maybe:
viewtopic.php?f=230&t=3777&p=17863&hili ... +1.#p17863
-
- Member
- Posts: 9
- Joined: 15 May 2009 06:06
Re: OXE 11.1 VMWare ESX 5.5 Installation Problem with linux.ram
I used no template, I just created the vm from Scratch with the esx wizard. Works fine