Im trying to set up a V24 interface module to do call logging.
but I cant find any good info to configure this right from front to back.
the V24 needs to connect to a UA interface. ( shelf 3 board 1, mix board port 1 )
you connect the V24 to your laptop.
and after that Im lost.
what do you all need to configure.
on this site I found a little bit of info on the V24. but I cant seem the find something good of a manual.
anyone can talk me through this front to back ?
configuring V24 cti interface module
Re: configuring V24 cti interface module
i dont think that it possible to do a call logging through v.24, so that´s maybe why you find no infos
Re: configuring V24 cti interface module
what about through a moxa box?
Re: configuring V24 cti interface module
what about through a moxa box?
Re: configuring V24 cti interface module
also what do you log through the V24 and cli console ports of the V24 ?
Re: configuring V24 cti interface module
also what do you log through the V24 and cli console ports of the V24 ?
Re: configuring V24 cti interface module
its a console to the linux system, maybe you can change the v24 Port to have some outputs, but i don´t think that these are usable for call logging.
-
- Member
- Posts: 37
- Joined: 12 Apr 2012 09:39
Re: configuring V24 cti interface module
Maybe an Option is to setup this connection AS Hotel interface Mike AHL protocoll. I am not sure which information will be send from oxe over AHL link
Gesendet von meinem A0001 mit Tapatalk
Gesendet von meinem A0001 mit Tapatalk
ACFE OXE R11.1 | ACSE OpenTouch R2.0 | ACSE 8770 R2.5