Hi all,
What is the procedure to upgrade the firmware at 6860/6860E, how many files do I required?
I have only Uom.img but in software.lsm it tell about other files as well such as
Primary-site: file:Udiag.img, 41312164
Primary-site: file:Uos.img, 212309712
Primary-site: file:u-boot.8.1.1.R01.664.tar.gz, 588730
Can you please guide me through ?
Best Regards,
Firmware upgrade
-
- Member
- Posts: 28
- Joined: 14 Jun 2015 22:52
Re: Firmware upgrade
Only one file and put it inside /flash/working
Then reload 6860E from working.
Do synchronization between /flash/working and /flash/certified after reloaded
Done
Then reload 6860E from working.
Do synchronization between /flash/working and /flash/certified after reloaded
Done
-
- Member
- Posts: 28
- Joined: 14 Jun 2015 22:52
Re: Firmware upgrade
Only one file and put it inside /flash/working
Then reload 6860E from working.
Do synchronization between /flash/working and /flash/certified after reloaded
Done
Then reload 6860E from working.
Do synchronization between /flash/working and /flash/certified after reloaded
Done
Re: Firmware upgrade
How to do reload from working?
can you please list the commands, first time I am touching 6860 box.
I have this error as well
OS6860e-U28-> copy flash-synchro
ERROR: Attempt to copy working to cert w/flash synchr failed
can you please list the commands, first time I am touching 6860 box.
I have this error as well
OS6860e-U28-> copy flash-synchro
ERROR: Attempt to copy working to cert w/flash synchr failed
Re: Firmware upgrade
Hi,
copy flash-synchro is for synchr within a VC/Stack to the other chassis.
you need: copy running certified
Best way is to use: write memory flash-synchro
In switch management guide all is written.
regards
Silvio
copy flash-synchro is for synchr within a VC/Stack to the other chassis.
you need: copy running certified
Best way is to use: write memory flash-synchro
In switch management guide all is written.
regards
Silvio
Re: Firmware upgrade
> reload from working no rollback-timeout ist the command