4XX8EE Phones with Asterisk
Re: 4XX8EE Phones with Asterisk
Hi all!
I´m using the ip touch 4018 with Elastix and till now, everything goes well! But as I have many devices I would like to use DHCP config to set the TFTP address automatically.
I´m almost there, I created a TFTP server, put lanpbx.cfg/sipconfig-mac.txt files in it and set the DHCP server like attached image, but now my device keep saying: HTTP DOWNLOAD ERROR and after this I received this message: WRONG PARAMETER.
Can someone help me?
Thanks in advance!
Renato
I´m using the ip touch 4018 with Elastix and till now, everything goes well! But as I have many devices I would like to use DHCP config to set the TFTP address automatically.
I´m almost there, I created a TFTP server, put lanpbx.cfg/sipconfig-mac.txt files in it and set the DHCP server like attached image, but now my device keep saying: HTTP DOWNLOAD ERROR and after this I received this message: WRONG PARAMETER.
Can someone help me?
Thanks in advance!
Renato
You do not have the required permissions to view the files attached to this post.
Re: 4XX8EE Phones with Asterisk
Are the 2.12.00 the latest firmware? Thank you. Is there any web where we can download the latest one?fbird wrote:Firmware files:
http://en.file-upload.net/download-1141 ... G.zip.html
http://www.xup.in/dl,39213711/FW_40x8(G).zip/
http://www.megafileupload.com/6l8m/FW_40x8(G).zip
FW_40x8(G).zip Contains:md5sum:2.12.00_4018_40x8G/
2.12.00_4018_40x8G/noesip4018
2.12.00_4018_40x8G/datsip40x8G
2.12.00_4018_40x8G/noesip40x8G
2.12.00_4018_40x8G/datsip4018
2.12.20_40x8G/
2.12.20_40x8G/datsip4028G
2.12.20_40x8G/noesip4028GThe 4028G can be used for 4028EE & 4038 EE.c8ec5c31b91e7845e66a46abf6bddbd6 FW_40x8(G).zip
4018 can be used with 4008 & 4018.
-
- Member
- Posts: 3
- Joined: 10 Jan 2017 08:07
Re: 4XX8EE Phones with Asterisk
Hi, I managed to connect a 4038EE to a Fritzbox using Reynoud's config file. Unfortunately, the phone reboots every few minutes after the following syslog message:
What does this mean?
This is the config file. Any help would be highly appreciated.
Code: Select all
app_call_set_sip_mode:set to standardmode and reset
This is the config file. Any help would be highly appreciated.
Code: Select all
[dns]
###########################################################################
## The primary DNS IP address HAS TO BE FILLED
## If no DNS, use the SIP proxy address instead
###########################################################################
dns_addr=192.168.178.2
dns2_addr=
hostname=fritz.box
[sip]
###########################################################################
## Domain name : IP address, FQDN or domain name (see the SIP proxy config)
###########################################################################
domain_name=192.168.178.2
###########################################################################
## Primary SIP proxy and SIP registrar settings
##
## Proxy address : IP address, FQDN or domain name
## Registrar address : IP address, FQDN or domain name (usually, the proxy)
## SIP proxy UDP port : usually 5060
## SIP registrar UDP port : by default 5060
###########################################################################
proxy_addr=192.168.178.2
proxy_port=5060
registrar_addr=192.168.178.2
registrar_port=5060
outbound_proxy_addr=
outbound_proxy_port=
###########################################################################
## Redundancy settings
##
## Proxy address : IP address, FQDN or domain name
## Registrar address : IP address, FQDN or domain name (usually, the proxy)
## SIP proxy UDP port : usually 5060
## SIP registrar UDP port : by default 5060
## sip_transport_mode_survi : Transport mode in PCS mode
## 0 = UDP or TCP
## 1 = UDP
## 2 = TCP
###########################################################################
proxy2_addr=192.168.178.2
proxy2_port=5060
registrar2_addr=192.168.178.2
registrar2_port=5060
outbound_proxy2_addr=
outbound_proxy2_port=
pcs_addr=192.168.178.2
pcs_port=5060
sip_transport_mode_survi=0
option_timer=120
###########################################################################
## Global SIP parameters
## Transport mode : 0 = UDP or TCP
## 1 = UDP
## 2 = TCP
## local_rtp_port : RFC3605 is not supported in this release, so
## only default value can be used
## PRACK type : 0 = PRACK supported
## 1 = PRACK required
## 2 = PRACK disabled
## Codec settings : 0 = G711 (PCMU)
## 4 = G723.1
## 8 = G711 (PCMA)
## 18 = G729A
###########################################################################
register_expire=3600
register_retry=300
local_sip_port=
sip_transport_mode=0
local_rtp_port=42000
local_rtcp_port=42001
prack_type=0
preferred_vocoder=8,0,4,18
###########################################################################
## SIP authentication.
##
## Realm : If no authentication, leave empty
## Authentication name : HAS TO BE FILLED
## If no authentication, PUT A VALUE LIKE none
## Authentication password : If no authentication, leave empty
###########################################################################
authentication_realm=192.168.178.2
authentication_name=620
authentication_password=6200
user_name=620
display_name=Alcatel-1
###########################################################################
## Voicemail settings
##
## Voice mail URI : directory number of the voice mail
## user name : directory number of the set
## MWI URI : complete SIP URI of the voice mail
###########################################################################
voice_mail_uri=
message_waiting_indication_uri=
[qos]
###########################################################################
## SIP & RTP DIFFSERV : [0,63]
## SIP QOS Tickets : 0 = disable
## 1 = enable
## SIP QOS Tickets Target : domain name
###########################################################################
sip_diffserv=0
rtp_diffserv=0
sip_qos_tickets_enable=0
sip_qos_tickets_target=
[sntp]
###########################################################################
## SNTP server settings (can be OXE or an external server)
##
## Timezone construction : UT::60:032902:102503
## GMT delta : 60 = + sixty minutes from GMT time
## Daylight saving start (mmddhh) : 032902 = 29 March 2am
## Daylight saving end (mmddhh) : 102503 = 25 October 3am
## The daylight saving settings HAVE to be changed each year.
###########################################################################
sntp_addr=192.168.178.2
timezone=UT::60:032902:102503
[telnet]
###########################################################################
## Password to access the telnet session
###########################################################################
telnet_password=0000
[arp]
###########################################################################
## Mode : 0 = ARP spoofing disabled
## 1 = ARP spoofing enabled
###########################################################################
arp_spoofing_enable=1
arp_spoofing_timer=30
[init]
###########################################################################
## For IP Touch with SIP binary in 1.xx, 2.00.10 and 2.00.20, equal or greater than 2.00.81
## mode 0 = SIP
## mode 1 = NOE
##
## For IP Touch with SIP binary 2.00.30 to 2.00.80
## mode 0 = NOE
## mode 1 = SIP
###########################################################################
application_mode=0
[audio]
###########################################################################
## Tone country : 0 = English
## 1 = French
## 2 = German
## 3 = Italian
## 4 = Spanish
## 5 = Dutch
## 6 = Portuguese
## DTMF type : 0 = RFC2833
## 1 = In-band
## 2 = SIP INFO
## DTMF level / RLR handset / SLR handset / Sidetone handset :
## 0 = 0db, 1 = +3db, 2 = +6db, 3 = -3db, 4 = -6db
## VAD / DTMF feedback / Hearing Aid :
## 0 = VAD not used
## 1 = VAD used
###########################################################################
tone_country=2
dtmf_type=1
dtmf_level=0
dtmf_avt_payload_type=96
vad=0
dtmf_feedback_enable=0
rlr_handset=0
slr_handset=0
sidetone_handset=2
hearing_aid_enable=0
[appl]
###########################################################################
## Password to access the administrator menu on the phone (digits only)
## Power priority : 1 = critical
## 2 = high
## 3 = low
## Time format : 0 = 24 hours format
## 1 = AM / PM
## Speed dial numbers (first and last name, URI)
###########################################################################
admin_password=000000
bluetooth_parameters=blue
supported_language=0
remote_forward_code=
remote_forward_deactive_code=
power_priority=3
asset_id=
time_format=
speed_dial_1_first_name=
speed_dial_1_last_name=
speed_dial_1_uri=
speed_dial_2_first_name=
speed_dial_2_last_name=
speed_dial_2_uri=
speed_dial_3_first_name=
speed_dial_3_last_name=
speed_dial_3_uri=
speed_dial_4_first_name=
speed_dial_4_last_name=
speed_dial_4_uri=
[admin]
###########################################################################
## Global admin parameters
## Binary polling timer : 10 min - 65535 min (default 480 min)
## Config polling timer : 5 min - 65535 min (default 60 min)
###########################################################################
binary_polling_timer=480
config_polling_timer=60
disable_pc_port=0
activate_vlan_filter=0
Re: 4XX8EE Phones with Asterisk
Hey Chris,
I had the same error and fixed it with the following settings:
As I recall the option timer did the trick...
rgds,
Reinoud
I had the same error and fixed it with the following settings:
Code: Select all
proxy2_addr=
proxy2_port=
registrar2_addr=
registrar2_port=
outbound_proxy2_addr=
outbound_proxy2_port=
pcs_addr=
pcs_port=
sip_transport_mode_survi=
option_timer=0
rgds,
Reinoud
-
- Member
- Posts: 3
- Joined: 10 Jan 2017 08:07
Re: 4XX8EE Phones with Asterisk
Hi Reinoud,
thanks a lot, that worked!
Did you succeed to use any other function of the set, e.g. the MWI or the FritzBox Phonebook? I can add entries locally at the phone, but the entries in the config file (speed_dial_1...) are ignored.
regards,
Chris
thanks a lot, that worked!
Did you succeed to use any other function of the set, e.g. the MWI or the FritzBox Phonebook? I can add entries locally at the phone, but the entries in the config file (speed_dial_1...) are ignored.
regards,
Chris
Re: 4XX8EE Phones with Asterisk
MWI works, although I don't use voicemail... I didn't try the phonebook...
-
- Member
- Posts: 3
- Joined: 10 Jan 2017 08:07
Re: 4XX8EE Phones with Asterisk
Ok, so what did you set for the following config items? I am not sure, which one gets the handset number and which one the Mailbox and in what format:
regards,
Chris
Code: Select all
voice_mail_uri=**600
message_waiting_indication_uri=**620@192.168.178.2
Chris
Re: 4XX8EE Phones with Asterisk
**600 is my voicemail/answering machine in fritz.box (which I actually don't use), **620 is my Alcatel-Lucent SIP set.
Re: 4XX8EE Phones with Asterisk
Hello Reinoud,
I have a problem with 4008 connecting to asterisk. I think you can help me.
Is it possible to contact you in person?
Regards,
I have a problem with 4008 connecting to asterisk. I think you can help me.
Is it possible to contact you in person?
Regards,
Re: 4XX8EE Phones with Asterisk
Hello,
Does anybody here have an alcatel-lucent 4008 EE set ?
If yes, please contact me.
Regards,
Does anybody here have an alcatel-lucent 4008 EE set ?
If yes, please contact me.
Regards,