omniswitch 6250p24 crash

[furiousfifou]

Hello

I have a problem with a Omniswitch 6250p24. After power loss, the switch doesn't boot, all ethernet led are lit immediately. It's impossible to connect with the console port.

Led "OK" and led "PR1" are down.

The switch is not stacked.

the firmware version is 6.6.4.177.R01

Is it possible to reinstall flash with any console connection ?

[silvio]

this is a known issue... as attachment a techtip.
hope this will help you also at 6250-
regards
Silvio

[furiousfifou]

Hello,

I don't know what, i not have permission for this attachement, have you a another way to send it ?

Thank you

[devnull]

If you can't see anything on the console at all, the doc that silvio sent will be no help, as this describes a software-error, but requires some uboot/miniboot magic.

If you can't see anything on console you will have to RMA it.

[mez77]

Thanks,but i can't find the firmware.