Hi experts ,
I have installed OXE system, and have APA8 analog trunk card , programming is done ( kindly check the attached config pic)
When tried to call from out side ,I can hear the caller but the caller could not hear me ( voice from my side ) the area is Saudi Arabia .( All sets are ALE-300 IP phones and working fine internally )
Any advise please with thanks.
OXE analog trunk issue ( I can hear the caller but he could not hear me)
OXE analog trunk issue ( I can hear the caller but he could not hear me)
You do not have the required permissions to view the files attached to this post.
Re: OXE analog trunk issue ( I can hear the caller but he could not hear me)
If you connect analogue phone directly to the external line - you have voice in both direction?
If you use another port on APA8 card - problem the same?
If you use another port on APA8 card - problem the same?
Re: OXE analog trunk issue ( I can hear the caller but he could not hear me)
Yes when connect external analogue to the line there is voice in both sides.
When connect the APA8 PROTS and call , the problem occurred ( I can hear the caller , but he could not hear me)
When connect the APA8 PROTS and call , the problem occurred ( I can hear the caller , but he could not hear me)
Re: OXE analog trunk issue ( I can hear the caller but he could not hear me)
Not clear with another ports. If you use another APA8 port - problem the same?
One way conversation - in both case (incoming and outgoing call)?
If in both - I suggest - make wireshark trace. You can find - RTP flow absent from GD. Or your voice present on GD and you have some problem in your LAN.
One way conversation - in both case (incoming and outgoing call)?
If in both - I suggest - make wireshark trace. You can find - RTP flow absent from GD. Or your voice present on GD and you have some problem in your LAN.