ATM SYSTEM
This object manages the ATM switching properties. The main purpose is to define the ATM network address, set the connection parameters, put the ATM connection in or out of service.
Special function:
CES (Circuit Emulation Service) ATM objects.
Shelf objects:

• BBC155 interface (contains the 155 Mb/s ports)
• ATM port
• ATM port E1

ATM menu objects:

• ATM system
• Traffic description
• Point to point connection

Other ATM objects not related to C.E.S.
Shelf objects:

• Interfaces AMS8 , IOBB, BBC25, BBC34

ATM menu objects:

• Multi point connection
• ISP address

Instance
Administrative status
If the administrative status is set to out of service, all activities in the ATM objects will be out of service.

Operational status
Consultation on the current status

Network address
Leave the default address.
39.5555.55.555555.5555.5555.5555

Internal bandwidth (Kb/s)
The bandwidth can be set within the limit of what is available on the backpanel; by default it is set to the maximum physically possible on the backpanel.

Ilmi polling timer
Polling period of the MIB ILMI by the system, in seconds.