MODEM TRUNK GROUP
This table makes it possible to create trunk groups (pool) of modems; that is, to introduce junctions < equipment of analog line - modem / TA - equipment of UA numeric line> using common criteria (set-up, terminal type, connection COS) in the same lot.
The junctions "modem / TA" are introduced by the couple directory number of the analog trunk (modem) / directory number of the TA.
Therefore, as soon as a user needs a modem (composition of a prefix or using the DATA repertory), one of these is allocated to them depending on their user profile.
This table is mainly used for minitels.
A modem trunk group can also contain junctions <Equipment of numeric line UA - TA / TA - equipment of numeric line UA> This type of trunk group is used if the DATA repertory is used with a logon number corresponding to an non empty table.
A modem trunk group can also contain extraction trunks consisting of <Equipment of numeric line UA - TA / TA - equipment of numeric line UA>. An extraction trunks is used by the system when a connection to the server is made by logon (see LOGON).

Modem Trunk Group Id
8 groups of modems can be created.

Terminal Type
The terminal type is to be selected from the following list:


Setup Id
The set-up parameters of the TA are configured under this number (between 0 and 49) in the set-up table (see SET UP).

Connection Category ID
Each connection COS (0 to 31) authorizes or prohibits links between terminals.

Modem Trunk List