Input method can be used on 8 & 9 Series, the default value is Nothing.
Nothing: Only Latin is available.
Cyrillic: Cyrillic and Latin are available.
Pin Yin: Chinese Pin Yin and Latin are available.
Jamo: Korean Jamo and Latin are available.
Stroke: Chinese Stroke and Latin are available.
Zhu Yin: Chinese Zhu Yin and Latin are available.
Hebrew: Hebrew and Latin are available.
Display non replied calls in "Info" home page when "My Homepage" is present.
Don't display forward towards voice mail and forward towards text
message when programming forward.
When going off-hook, display "Speed dial" page instead of "Please dial"
Yes : Timer Enabled for Displaying Programmable keys
This parameter applies only when the Prot.against Multi-l. ringing attribute is disabled.
- Beep (default value): when a call arrives on a set already in conversation,
a beep is played.
- Short Ring: when a call arrives on a set already in
conversation, the set rings.
This ringing stops when any of the following occurs:
- System timer no. 331 elapses.
- The call is answered, released or overflows to another number.
- Long Ring: when a call arrives on a set already in conversation, the set rings.
This ringing stops when any of the following occurs:
- The user presses the silent softkey.
- The call is answered, released or overflows to another number.
To enable full duplex or half duplex preference with handsfree mode in Series 8&9 sets.
Echo robustness performance with half duplex. Default behaviour is full duplex
True: Echo robustness preference.
False: Full duplex preference.
This parameter controls the reboot of x8 set, in case the connection
with CS or PCS is lost and set has an active voice flow.
True: Set reboots at the end of voice flow or further to user action.
Enables transparent reboot.
False: Set reboots immediately.Disables transparent reboot.
Note: Change of this parameter requires reboot of IP sets.
True: Bluetooth will be enable on 4068 set
False: Bluetooth will be disable on 4068 set.
Default value is true.
This parameter controls the reboot of x8 set, in case the connection with CS or PCS is lost and set
has an active voice flow.
True: Set reboots at the end of voice flow or further to user action. Enables the Transparent reboot.
False: Set reboots immediately. Disables the transparent reboot.
Note: Change of this parameter requires reboot of IP sets.
This option enables or disables the display of services lists on Series 8&9 sets.
When display is disabled, the services lists are only hidden to the users, but the services are still available.
NO: (Default value) Services lists are present in menus.
YES: Services lists are hidden to users.
Default value: NULL
Enter a string of 4 characters which is same as the application Id configured
in PRS to access voice mail using PRS application via x8 sets mail key.
If the input string is empty then ‘x8 sets mail key’ use ‘TUI application’
which displays no menu in NOE screen and plays interactive voice guide
to access voice mail.
Index of the skin to be used on NOE-3G EE sets.
Default value is 0. (Terminal's default skin(1) is used. Skin Modifiable by user ULM)
For other values, Skin is non- modifiable by ULM.
Enable or Disable DialPad Rotation effect for MyIC Phone Standard
Specifies backlight on duration when no user activity for all x8-9 sets with backlight capability.
YES: the softkey - menu - Settings - Options - IP parameters does not appear on x8 sets.
Disable : request standard power class 1 or 2 of POE (default)
Enable : request more energy class 3 of POE
Auto: reserved for future use (= disable if set)
Note: Change of this parameter requires reboot of IP sets.
Allow to connect device on usb device
Allow usage of hands free or speaker mode on the device
Active ambient light sensor to adapt brightness of leds according to the external brightness
Default value is 0. (Terminal's default value(enabled) is used. Modifiable by ULM). For other values, it is non-modifiable by ULM.
Light Back Logo LED that changes color depending on call state (idle-white, ringing-blinking blue, busy-blue).
Default value is 0. (Terminal's default value(enabled) is used. Modifiable by ULM). For other values, it is non- modifiable by ULM.
Configure the URL to private store where the user would find Apps used for their business.
URL format is either Name of the server, port and path or Address, port and path.
URL to reach hospitality web application
Yes: enable DHCP survivability (default)
No: disable DHCP survivability
Used to control the DHCP survivability of devices
If DHCP survivability is disabled, device must free the ip address according to the lease time remaining when DHCP is no more reachable to avoid duplicate IP address in the network when DHCP is reachable. The DHCP can reallocate the address to another device after the lease time.
YES : Info page displays only the directory name and number.
NO : Default display. Other status related items are displayed along with name and number
Note: Change of this parameter requires reboot of NOE sets.
If this parameter is True, When a set is in a conversation,
- All further actions are not allowed except call release (on hook).
- No softkeys are available irrespective of the features, rights configured in Phone COS.
Otherwise, all softkeys, features are available according configurations.
Default value is False.